Roland ep-90/70 Connecting the Pedal, Turning the Power On and Off, Damper Pedal, Soft Pedal

Getting Ready

3. Connecting the Pedal

Connect the supplied pedal to one of the

pedal jacks.

fig.3-03

	MIDI			Pedal			Input			Output
Out		In	Damper		Soft	R		L (Mono)	R	L	(Mono)

or

If the pedal is connected to the Damper pedal jack, it can be used as a damper pedal.

If the pedal is connected to the Soft pedal jack, it can be used as a soft pedal.

Damper Pedal

Use this pedal when you want the sound to linger on. While the damper pedal is depressed, the sound from the keyboard continues to linger for an extended period, even when you remove your fingers from the keys. This is the same function as the right-most pedal on an acoustic piano.

Soft Pedal

This pedal softens the sound.

Playing with the soft pedal depressed produces a sound that is not as strong as when otherwise played with the equivalent strength.

This is the same function as the left-most pedal on an acoustic piano.

MEMO

By connecting an additional pedal, you can use both a damper pedal and a soft pedal simultaneously.

To purchase an additional pedal (DP-2/DP-6), please contact the dealer where you purchased the ep-90/70.

4.Turning the Power On and Off

NOTE

Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

1.Turn the volume all the way down.

fig.3-04

Volume

Min Max

2.Press the [Power] switch, to turn on the

power.

The power switch is located at the right side of the back panel.

fig.3-05

Power	DC In 9V
	1200 mA
On Off

fig.3-06.e

Lower position

ON

The power indicator lights in red.

After a few seconds, the keyboard will produce sound when played.

fig.3-07.e

Power Volume Reverb Chorus Piano 1

Min Max

Lit

NOTE

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

9