Connecting to MIDI Devices
Transmitting/Receiving
Sound Selection Data—
Program Change
Program Changes are messages that tell an instrument to “switch to sound number x.”
When the other device receives this message, it will switch to whichever of its sounds corresponds to the number contained in the message.
When you press the
Each time the power is turned on, the instrument will always be set to “On” (it will transmit/receive Program Change messages).
If you set it to “Off,” the
While holding down the [Piano 1] button, [Piano 2] button, and [Harpsichord] button, press the “E5” note to turn the setting On, or the “F5” note to turn the setting Off.
→For the notes that correspond to each setting, refer to
“Functions Assigned to the Keyboard” (p. 31).
fig.9-11.e
Vibra- | Harpsi- |
Piano 1 Piano 2 E.Piano phone | chord |
While holding down three buttons
On Off
E5 F5
Press
The tones and their corresponding Program Number appear
below:
Program Number | Tone |
|
|
|
|
|
|
|
01 | Piano 1 |
|
02 | Piano 2 |
|
03 | E.Piano |
|
04 | Vibraphone |
|
05 | Harpsichord |
|
06 | Organ |
|
07 | Strings |
|
08 | Choir |
|
09 | Piano 1 + Piano 2 |
|
10 | Piano 1 + E.Piano |
|
11 | Piano 1 + Vibraphone |
|
12 | Piano 1 + Harpsichord |
|
13 | Piano 1 + Organ |
|
14 | Piano 1 + Strings |
|
15 | Piano 1 + Choir |
|
16 | Piano 2 + E.Piano |
|
17 | Piano 2 + Vibraphone |
|
18 | Piano 2 + Harpsichord |
|
19 | Piano 2 + Organ |
|
20 | Piano 2 + Strings |
|
21 | Piano 2 + Choir |
|
22 | E.Piano + Vibraphone |
|
23 | E.Piano + Harpsichord |
|
24 | E.Piano + Organ |
|
25 | E.Piano + Strings |
|
26 | E.Piano + Choir |
|
27 | Vibraphone + Harpsichord |
|
28 | Vibraphone + Organ |
|
29 | Vibraphone + Strings |
|
30 | Vibraphone + Choir |
|
31 | Harpsichord + Organ |
|
32 | Harpsichord + Strings |
|
33 | Harpsichord + Choir |
|
34 | Organ + Strings |
|
35 | Organ + Choir |
|
36 | Strings + Choir |
|
|
|
|
|
|
|
28
