1
SAFETY RELATEDSYMBOLS
CAUTION
RISKOF ELECTRIC SHOCK
DONOT OPEN
Protective Ground Terminal
AC mains (Alternating Current)
Hazardous Live Terminal
ON: Denotes the product is turned on.
OFF: Denotes the product is turned off.
WARNING
Describes precautions that should be observed to
prevent the possibility of death or injury to the user.
CAUTION
Describes precautions that should be observed to
prevent damage to the product.
Always use proper ready-made insulated mains
cabling (power cord). Failure to do so could result
in shock/death or fire. If in doubt, seek advice from
a registered electrician.
Toprevent fire and damage to the product, use only
Always install in accordance with the manufacturer's
instructions.
Keep product away from naked flames.
IMPORTANTSAFETY INSTRUCTIONS
Read these instructions
Follow all instructions
Keep these instructions. Do not discard.
Heed all warnings.
Only use attachments/accessories specified by the
manufacturer.
Do not tamper with the power cord or plug. These are
designed for your safety.
Do not remove Ground connections!
Protect the power cord and plug from any physical
stress to avoid risk of electric shock.
Do not place heavy objects on the power cord. This
could cause electric shock or fire.
WARNING
the recommended fuse type as indicated in this manual.
Do not short-circuit the fuse holder.Before replacing the
fuse, make sure that the product is OFF and disconnected
from theAC outlet.
Protective Ground
Operating Conditions
Power Cord and Plug
Cleaning
Servicing
Power Supply
External Connection
Do Not RemoveAny Covers
Fuse
Refer all servicing to qualified service personnel only.Do
not perform any servicing other than those instructions
contained within the User's Manual.
When required, either blow off dust from the product or
use a dry cloth.
Do not use any solvents such as Benzol orAlcohol.
For safety,keep product clean and free from dust.
If the plug does not fit yourAC outlet seek advice from a
qualified electrician.
Toavoid the risk of electric shock and damage, do not
subject this product to any liquid/rain or moisture. Do
not use this product when in close proximity to water.
Do not install this product near any direct heat source.
Do not block areas of ventilation. Failure to do so could
result in fire.
Never cut internal or external Ground wires. Likewise,
never remove Ground wiring from the Protective Ground
Terminal.
Before turning the product ON, make sure that it is
connected to Ground. This is to prevent the risk of
electric shock.
Covers should be removed by qualified service
personnel only.
Within the product are areas where high voltages may
present. Toreduce the risk of electric shock do not remove
any covers unless theAC mains power cord is removed.
Ensure that the mains source voltage (AC outlet) matches
the voltage rating of the product. Failure to do so could
result in damage to the product and possibly the user.
Unplug the product before electrical storms occur and
when unused for long periods of time to reduce the risk of
electric shock or fire.
No user serviceable parts inside.
This symbol, wherever used, alerts you to impo-
rtant operating and maintenance instructions.
Please read.
This symbol, wherever used, alerts you to the pre-
sence of un-insulated and dangerous voltages with-
in the product enclosure. These are voltages that
may be sufficient to constitute the risk of electric
shock or death.