Nilfisk-ALTO S-8 user manual Track IN/OUT Input, Output, Stereo AUX Return, AUX Send 1, Phones

23

22

-2-TRACK IN/OUT Input

STEREO AUX RETURN AUX SEND 2-TRACK IN/OUT

LEFT(MONO) RIGHT

11

L

LEFTRIGHT

22

R

TAPE IN TAPE OUT

21

21

Use the Tape input if you wish to listen to your Mix from a Taper Recorder or DAT, You can assign the signal coming form the Taper Recorder either to a pair of studio monitor using the Control Room assignment on the front panel or you can also send the signal directly to the Main Mix.

Output

These 1/4" TRS sockets will route the main mix into a tape recorder.

- STEREO AUX RETURN 22

Use these stereo 1/4" phone socket to return the sound of an effect unit or sound processor to the Main Mix. Alternatively you can use them as an extra auxiliary input.

- AUX SEND 1 and 2 23

These 1/4" phone sockets are used to send out the signal from the AUX Bus to external devices such as effects and sound processors.

- PHONES 24

This socket will send out the signal mix to a pair of headphones.

PHONES

24

12