ParaBody 870 manual Parts List, KEY Description QTY

PARTS LIST

KEY	PART #	DESCRIPTION	QTY
1	6215708	FOOT BRACE ASSY	1
2	6284702	ADJUSTABLE TUBE ASSY	1
3	6013708	CONNECTOR PLATE	1
4	3102942	3/8 X 3-1/2” BOLT	2
5	3102501	3/8” FLAT WASHER	4
6	3102802	3/8” LOCK NUT	2

KEY	PART #	DESCRIPTION	QTY
7	6011401	SAFETY LOCK PIN	1
8	6405201	2” SQ. END CAP	1
9	6236701	1-3/4” SQ. END CAP	1
10	6177001	2-1/2 X 5-1/2” NON SKID STRIP	4

FRONT

BENCH

FRAME

4

5

10

3

9

2

1

6

7

8

FIGURE 5

STEP 5:

•Remove the hardware from the FRONT LEG of BENCH assembly

•Insert one 1-3/4 END CAP (9) into the open end of the ADJUSTABLE TUBE ASSEMBLY (2) as shown

•Assemble the ADJUSTABLE TUBE ASSEMBLY (2) and the CONNECTOR PLATE (3) to the BENCH using two 3/8 X 3-1/2” BOLTS (4), four 3/8” FLAT WASHERS (5) and two 3/8” LOCK NUTS (6).

(NOTE: THE BRACKET ON THE ADJUSTABLE TUBE ASSEMBLY IS FLUSH (EVEN) WITH THE TUBE, ASSEMBLE FLUSH SIDE UP)

•Insert one 2” SQ END CAP (8) into the front end of the FOOT BRACE (1) as shown

•Attach four NON SKID STRIPS (10) to the FOOT BRACE (1)

•Slide the FOOT BRACE (1) over the ADJUSTABLE TUBE ASSEMBLY (2) to the desired hole setting and hold in place with the SAFETY LOCK PIN (7)

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

4