3. CONTROL AND STATUS
3.21 AT+CMER Mobile Equipment Event Reporting
Description | Command | Possible Responses | |
|
|
| |
Set phone | AT+CMER=[<mode> | • +CME ERROR: <err> | |
activity status | [,<ind>[,<bfr>]]] | • | OK |
|
| • ERROR | |
|
|
|
|
Read the | AT+CMER? | • | +CMER: <mode>,<ind>,<bfr> |
current setting |
| • | OK |
|
| • ERROR | |
Test if the | AT+CMER=? | • +CMER: (list of supported | |
command is |
|
| <mode>s), (list of supported |
supported |
|
| <ind>s), (list of supported |
|
|
| <bfr>s) |
• OK
• ERROR
Enables or disables the sending of unsolicited result codes from ME to TE in the case of key pressings, display changes, and indicator state changes. <mode> controls the processing of unsolicited result codes specified within this command. <bfr> controls the effect on buffered codes when <mode> 1, 2 or 3 is entered. If the ME does not support setting, +CME ERROR: <err> is returned.
<mode> | Description |
|
|
0 | Buffer unsolicited result codes in the TA; if TA result code |
| buffer is full, codes can be buffered in some other place |
| or the oldest ones can be discarded |
3 | Forward unsolicited result codes directly to the TE; |
| link specific inband technique used to embed result |
| codes and data when TA is in |
|
|
|
|
<ind> | Description |
|
|
0 | No indicator event reporting |
|
|
1 | Indicator event reporting using result code +CIEV: |
| <ind>,<value>. <ind> indicates the indicator order number |
| (as specified for +CIND) and <value> is the new value of |
| indicator. Only those indicator events, which are not |
| caused by +CIND shall be indicated by the TA to the TE |
|
|
|
|
<bfr> | Description |
|
|
0 | TA buffer of unsolicited result codes defined within this |
| command is cleared when <mode> 1...3 is entered |
|
|
81
LZT 123 7361 R1A
