16. SUPPLEMENTARY SERVICES
16.8 AT*ELIN | Ericsson Line Set |
|
|
|
|
|
|
| |
| Description | Command | Possible Responses | |
|
|
|
|
|
| Set the current line to | AT*ELIN=<line> | • | *ELIN: <line> |
| <line> |
| • | +CME ERROR: <err> |
|
|
| • OK | |
|
|
| • ERROR | |
|
|
|
|
|
| Read the current line | AT*ELIN? | • | *ELIN: <line> |
|
|
| • | +CME ERROR: <err> |
|
|
| • OK | |
|
|
| • ERROR | |
| Test if the command is | AT*ELIN=? | • | *ELIN: list of |
| supported |
|
| supported <line>s |
|
|
|
| +CME ERROR: <err> |
• OK
• ERROR
This command requests the ME to set the current line to <line>.
Note! The following command reads its value from the current line and is thus affected by the use of *ELIN:
AT+CACM - Accumulated Call Meter
<line> | Description |
|
|
1 | L1 |
|
|
2 | L2 |
|
|
16.9 AT*E2SSD M2M Supplementary Service Dispatch
Description | Command | Possible Responses | |
|
|
|
|
Send Supplementary | AT*E2SSD=<SS_String> | • | OK |
Service command |
| • ERROR | |
|
|
|
|
Shows if the command | AT*E2SSD=? | • | OK |
is supported |
| • | ERROR |
|
|
|
|
This command allows the user to send a Public MMI command string in order to activate, deactivate, interrogate or modify settings for Supplementary Services.
Once a string is sent, the command will return OK if parsed and sent successfully, otherwise ERROR is returned. The command does not verify that the operation executes successfully - use the AT*E2SSI command to gain feedback of the operation status.
241
LZT 123 7361 R1A
