Standard Horizon GM29 manual Text Mode, Esc

Models: GM29

1 266
Download 266 pages 35.21 Kb
Page 185
Image 185

13. SHORT MESSAGE SERVICES - POINT TO POINT

same as specified by the send message command, +CMGS. If writing fails, final result code +CMS ERROR: <err> is returned. See “AT+CPMS Preferred Message Storage”, page 181.

<stat>

Description

 

 

2

Stored unsent message (only applicable to SMs)

 

 

 

 

<index>

Description

 

 

Integer type

Value in the range of location numbers supported by the

 

associated memory

 

 

<length>

Description

 

 

Integer type

Value indicating in PDU mode (+CMGF=0), the length of

 

the actual TP data unit in octets (i.e. the RP layer SMSC

 

address octets are not counted in the length)

 

 

<pdu>

Description

 

 

...

In the case of SMS: GSM 04.11 SC address followed by

 

GSM 03.40 TPDU in hexadecimal format: ME/TA converts

 

each octet of TP data unit into two IRA character long

 

hexadecimal number (e.g. octet with integer value 42 is

 

presented to TE as two characters 2A (IRA 50 and 65))

 

In the case of CBS: GSM 03.41 TPDU in hexadecimal format

 

 

Text Mode

Description

Command

Possible Responses

 

 

 

Write message to

AT+CMGW [=<oa/da>

• +CMGW: <index>

memory

[,<tooa/toda>[,<stat>]]]

• +CMS ERROR: <err>

 

<CR>

• OK

 

Text is entered <ctrl-Z/

 

• ERROR

 

ESC>

 

 

 

Show if the command

AT+CMGW=?

• OK

is supported

 

• ERROR

 

 

 

Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage <mem2>. Memory location <index> of the stored message is returned. By default message status will be set to ‘stored unsent’, but parameter <stat> allows also other status values to be given. The entering of text is done as specified in the send message command, +CMGS. If writing fails, final result code +CMS ERROR: <err> is returned.

185

LZT 123 7361 R1A

Page 185
Image 185
Standard Horizon GM29 manual Text Mode, Esc