GM29 INTEGRATOR’S MANUAL
15.3 AT*E2STKD M2M STK Display Text
Description | Command | Possible responses | |
|
|
|
|
Answer to the | AT*E2STKD=<answer> | • | +CME ERROR <err> |
reception of |
| • | OK |
DISPLAY TEXT |
| • ERROR | |
|
| ||
|
|
|
|
Test if the | AT*E2STKD=? | • | *E2STKD: |
command is |
|
| (list of supported <answer>) |
supported |
| • | +CME ERROR <err> |
• OK
• ERROR
The ME passes the parameters within DISPLAY TEXT command to the external application by means of the unsolicited result code *E2STKD.
Command AT*E2STKD allows the external application to send the appropriate answer after receiving the unsolicited result code, and before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR response is generated.
Test command returns the list of supported <answer>. Values follow GSM 11.14 standard
<answer> | Description |
|
|
0 | OK. |
| Performed as required: the text was displayed and |
| cleared as requested. It corresponds to ‘00’ Command |
| performed successfully, described in the GSM standard |
1 | Failed. |
| User Terminated Session: the text was displayed as |
| requested and the user wants to end the proactive |
| session. It corresponds to ‘10’ Proactive session terminated |
| by the user, described in the GSM standard |
|
|
2 | Failed. |
| User requests backwards move: the text was displayed as |
| requested and the user wants to go backwards in the |
| session. It corresponds to ‘11’ Backward move in the |
| proactive SIM session requested by the user |
3 | Failed. |
| No response from user: the text was displayed, and |
| although the clear condition was “Wait for user to clear”, |
| the user did not react. It corresponds to ‘12’ no response |
| from user |
|
|
4 | Failed. |
| Screen is busy: the text could not be displayed |
|
|
Unsolicited Result Codes:
*E2STKD: <priority>,<clear_condition>,<coding>,<text_length>, <text>
218
LZT 123 7361 R1A
