PRODUCT SPECIFICATIONS
Applies to 95% furnaces only.
GMV95: UP TO 95% AFUE GCV9: UP TO 93% AFUE
HEATING INPUT: 46,000–115,000 BTU/H
*To receive the Lifetime Heat Exchanger Limited Warranty, 10-Year Unit Replacement Limited Warranty and 10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Québec. Full warranty details available at www.goodmanmfg.com.
GMV95/GCV9
MULTI-POSITION,TWO-STAGE/VARIABLE-SPEED
GAS FURNACEThe Goodman® brand GMV95/ GCV9 Two-Stage, Variable- Speed Gas Furnaces feature a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system.
Standard Features•Patented TuffTube™ dual-diameter tubular heat exchanger with Lifetime Limited Warranty* for as long as the original registered homeowner owns their home plus 10-Year Limited Unit Replacement Warranty*
•Two-stage gas valve operates with two-stage or single- stage thermostats
•Efficient and quiet variable-speed circulator motor gently ramps up or down according to heating or cooling demand
•110V Silicon Nitride igniter designed for long igniter life
•Furnace control board with self-diagnostics, color-coded low- voltage terminals, and provisions for electronic air cleaner and 120-volt or 24-volt humidifiers
•Low constant fan allows homeowner to activate very low speed to efficiently circulate air throughout the home. This setting costs as little as a 100-watt light bulb to operate.
•Dual-certified for sealed combustion direct vent (2-pipe) or non-direct vent (1-pipe) applications
•Quiet two-speed induced draft blower
•All models comply with California NOx emissions standards
Cabinet Features•Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
•Foil-faced insulation lines the heat exchanger
•Easy-to-install top venting is standard; alternate flue/vent located on the right (GMV95)
•Designed for multi-position installation – GMV95: upflow,
horizontal left or right; GCV9: downflow, horizontal left or right
•Airtight solid bottom for side return applications and easy-cut tabs for effortless removal in bottom air inlet applications
•Convenient left or right connection for gas and electric service
•Coil and furnace fit flush for most installations
| Contents | |
Nomenclature | 2 |
Product Specifications | 3 |
Dimensions | 4 |
Blower Performance Specifications | 7 |
Wiring Diagrams | 13 |
Accessories | 15 |
