Manuals / Patton electronic / Computer Equipment / Network Card

Patton electronic 3086 manual Factory default parameters, Safety when working with electricity

Models: 3086

1 196

Download 196 pages 1.92 Kb

Page 13

Model 3086 G.SHDSL Integrated Access Device User Guide	About this guide

Safety when working with electricity

•This device contains no user serviceable parts. The equipment shall be

returned to Patton Electronics for repairs, or repaired by qualified service personnel.

•Mains Voltage: Do not open the case the when the power cord is attached. Line voltages are present within the power supply when the power cords are connected. The mains outlet that is utilized to power the devise shall be within 10 feet (3 meters) of the device, shall be easily accessible, and pro- tected by a circuit breaker.

•For AC powered units, ensure that the power cable used meets all applica- ble standards for the country in which it is to be installed, and that it is con- nected to a wall outlet which has earth ground.

•For units with an external power adapter, the adapter shall be a listed Lim- ited Power Source.

•Hazardous network voltages are present in WAN ports regardless of whether power to the unit is ON or OFF. To avoid electric shock, use caution when near WAN ports. When detaching the cables, detach the end away from the device first.

•Do not work on the system or connect or disconnect cables during periods of lightning activity.

In accordance with the requirements of council directive 2002/ 96/EC on Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate this product from other waste and scrap and deliver to the WEEE collection system in your country for recycling.

Factory default parameters

The Model 3086 G.SHDSL IAD has the following factory default parameters.

•Ethernet IP address: 192.168.200.10/24

•WAN Connection: PPPoH Bridged

•Autonegotiate the G.SHDSL speed

•Ethernet and serial connections

•Annex B

•Remote (CPE)

•MDI (LAN connector)

•Switch configuration disabled

13

Image 13

Patton electronic 3086 manual Factory default parameters, Safety when working with electricity, About this guide

Contents

Shdsl Integrated Access Device Patton Electronics Company, Inc Contents Basic Application Configurations Contents Specialized Configurations 113 Contacting Patton for assistance 143 Cable Recommendations 157 Contents Page Audience About this guideStructure Precautions Safety when working with electricity Factory default parametersAbout this guide General conventions Typographical conventions used in this documentMouse conventions General Information Chapter contentsGeneral attributes Model 3086 G.SHDSL IAD overviewModel 3086 G.SHDSL IAD overview Ethernet Shdsl CharacteristicsTDM Interface Protocol supportATM Protocols PPP SupportManagement Model SecurityWAN DSL Power connector Rear panel connectors and switchesConsole port outlined in red Ethernet port outlined in green RJ-11/4 DSL line port uses pins 2 and 3 of the RJ-11 portLine port outlined in yellow Product Overview Applications Overview Product OverviewIP/FR and TDM Access Internet/Extranet AccessIP/FR and Voice over DSL Product OverviewMetro Intranet Access Quick Start Installation Installing the AC power cord Hardware installationWhat you will need Quick Start Installation Connecting network cablesPC Configuration Web Operation and ConfigurationIP address Quick Start modification IP address has now been successfully changedModel 3086 menu structure is shown in on Model 3086 home page displays see FigureModel 3086 Menu Structure Basic Application Configurations Basic Application Configurations IPoA Routed RFC Introduction TDM Port Routed WAN Services Bridged WAN ServicesRear panel power and interface connectors Connecting the 3086 serial port to a DCE Connecting the 3086 serial port to a DTEX.21 Ports InterfacesX.21 Ports Configuring the V.35 or X.21 port via DIP switchesDIP switches location Switch Position Function Factory Default Selected Option Switch Bank S2Switch Bank S3 T1 Interface Connection T1 InterfaceDIP Switch Configuration T1 Interface ConfigurationData Rate kbps Figuration only Line Code The 3086 T1 interface uses B8ZS Web Interface ConfigurationE1 Interface Connection E1 InterfaceDescription of S2 options follows the table E1/CRC S3-8 Setting Web Interface Configuration CLI configuration Using the 3086 as a simple modem TDM data over DSLCLI configuration Wait for configuration saved message… Saving configuration… Clear Error Counters Web browser configurationCircuit ID Intended DSL Data RateDSL Rate Number of i Bit Intended Serial Interface Data RateTerminal Type TDM Plus Ethernet Traffic Selecting the DSL link speed Selecting PCM modeAssigning bandwidth to serial and Ethernet ports Central or Remote terminal Master/SlaveFor 3086 B type For 3086 a at the prompt typeSelect between Annex a and Annex B To select Annex B type Circuit ID Intended Serial Interface Data Rate Interface Type Model 3086 Remote Configuration Steps PPPoH Bridged Using the 3086 in Routed or Bridged applicationsTwo stand-alone units directly connected Ethernet extension Hdlc Pppoh BridgedLeave User name and Password blank. Click on Apply Model 3086 Central Configuration Steps PPPoH Bridged Network Extension HDLC-PPPoH Routed Model 3086 Remote Configuration Steps PPPoH RoutedModel 3086 G.SHDSL Integrated Access Device User Guide Click on Configure Basic Application Configurations Model 3086 Central Configuration Steps PPPoH Routed Using the 3086 in Routed or Bridged applications RFC 1483 Bridged Configuration Bridged application configurations to a DslamDslam Connections with remote CPE units Model 3086 Remote Configuration Steps RFC 1483 Bridged Model 3086 Central Configuration Steps RFC 1483 Bridged PPPoH Bridged Configuration Dslam Connections with remote CPE units Model 3086 Central Configuration Steps PPPoH Bridged Model 3086 Remote Configuration Steps PPPoA Bridged PPPoA Bridged RFC 2364 ConfigurationVPI = VCI = LLC header mode = off Hdlc header mode = off Model 3086 CentralConfiguration Steps PPPoA BridgedModel 3086 Remote Configuration Steps RFC 1483 Routed Routed application configurations to a DslamRFC 1483 Routed Model 3086 G.SHDSL Integrated Access Device User Guide Basic Application Configurations One IP interface was called ip1 with an IP address Model 3086 Central Configuration Steps RFC 1483 RoutedIp set interface ip1 ipaddress 192.168.100.2 Dslam Connections with remote CPE units Basic Application Configurations PPPoH Routed Ip set interface ip1 ipaddress 192.168.100.2 Dslam Connections with remote CPE units Basic Application Configurations Model 3086 Central Configuration Steps PPPoH Routed Basic Application Configurations Basic Application Configurations PPPoA Routed RFC Model 3086 Remote-Client Configuration Steps PPPoA RoutedChap User Namefred Passwoodfredspass Click on ConfigureBasic Application Configurations Dslam Connections with remote CPE units Model 3086 Central-Server Configuration Steps PPPoA Routed 100 101 102 Local IP Magic Number MRU103 104 105 106 IPoA Routed RFC Model 3086 Remote Configuration Steps IPoA Routed107 108 109 110 VPI0 VCI700 WAN IP address Click on Apply Model 3086 Central Configuration Steps IPoA Routed111 112 Specialized Configurations Router IP ConfigurationsRIP and RIPv2 Static Route Dhcp Server and Relay115 Specialized Configurations116 DNS Client117 DNS Relay ModeIP Configurations Security 120 Configuring the IADSecurity Configuring the security interfaces121 122 Deleting a Firewall PolicyFirewall Portfilters Enabling the FirewallFirewall Policies Firewall policy named item0 is now deleted124 Security Triggers125 Intrusion Detection System IDS Scan Attack Block DurationDefault = 86400 seconds126 127 Intrusion Detection System IDS NAT Network Address Translation 130 Enabling NATNAT Network Address Translation Global address pool and reserved map131 132 Monitoring Status 134 Status LEDsDiagnostics Configuration Software UpgradesProcedure PingOperating Local Analog Loopback LAL-Serial Port Loop DiagnosticsOperating Remote Digital Loopback RDL-DSL Loop 137Network Loop T1/E1 Diagnostics138 139 T1/E1 Local Loop140 QRSS-BIT Error Rate DiagnosticsT1/E1 connection Status AlarmsTransceiver Status FDL statistics T1 only142 BIT Error Rate V.52 DiagnosticsContacting Patton for assistance Out-of-warranty service Warranty coverageContact information Returns for creditRMA numbers Return for credit policyShipping instructions Contacting Patton for assistancePage Appendix a Compliance information Compliance SafetyRadio and TV Interference FCC Part CE Declaration of ConformityFCC Part 68 Acta Statement Authorized European RepresentativeIndustry Canada Notice 149150 Appendix B Specifications Shdsl Characteristics General CharacteristicsEthernet 152T1/E1 Interface 3086/RIK and RIT models only Sync Serial Interface64K/G.703 Port 3086/RIF Model Protocol SupportATM Protocols PPP SupportManagement 154Power and Power Supply Specifications DimensionsSecurity Compliance Standard Requirements156 Appendix C Cable Recommendations Ethernet Cable DSL CableAdapter Foot 3 m, RJ-11/RJ-11 refer to RJ-11non-shielded port onAppendix D Physical Connectors RJ-45 shielded 10/100 Ethernet port Assuming the MDI-X switch is in the out positionRJ-11 non-shielded port RJ-45 non-shielded RS-232 console port EIA-56135 DB-25 Female Connector 35 M/34 ConnectorPhysical Connectors Serial port21 DB-15 Connector E1/T1 RJ-48C Connector Power inputIEC 320 connector two prong 162163 Appendix E Command Line Interface CLI OperationProduces a list of numbered transport objects CLI TerminologyLocal VT-100 emulation Remote TelnetCommand Line Interface CLI Operation Using the ConsoleThen 165Setting user passwords Administering user accountsAdding new users Following information is returnedControlling login access Changing user settingsControlling user access Shdsl CommandsFor CPE remote unit To establish the DSL link168 169 170 Appendix F Interworking Functions Information Interworking Functions Information ManagementType Default Value nomaintenance LMI Configuration OptionsFrame Relay Local Management Interface 173T391Value Default Value MgtAutoStart Default Value FalseT392Value Default Value FullReportCycle Default ValueShow current configuration CLI Configuration MethodsCommand lmi show Set configuration variableWeb Configuration Methods Frame Relay Service Interworking FRF.8FRS Configuration Options DE MappingFecn Mapping Translation Mode177 178 FRS NameCommand frs set group # variable value CLI Configuration MethodShow one of the eight groups Set variable attributes on a specified groupFRS Overview Screen Set variable attributes on a specified channel180 181 Group/Channel Level Configuration ScreenFrame Relay Network Interworking FRF.5 FRN Configuration Options182 183 Port Level Configuration Options184 Channel Level Configuration OptionsList all ports available to the system CLI Configuration Methods for Port Level ManagementShow detailed information about a specific port 185Configuration Management of the Channel Level Variables Command frn set port# variable valueUnderstanding the Channel Level View 186Command frn set port# channel # variable value Set Configuration Variables associated with the Channels187 188 Port Level Information ScreenPacket Information Screen Channel Level Information Screen189 Frame Relay CLI Configuration Options Frame Relay Configuration OptionsFrame Relay Ethernet Based Operations Delete the specified transport Clear all Frame Relay TransportsList all active Frame Relay Channels 191Web Based Configuration of the Frame Relay Channel Serial Interface ConfigurationConfiguration Variables Available Clock ModeGain help about the Serial Interface Show current configuration settings193 Ping commands from the CLI Interface Web Interface ConfigurationsPing and Trace Route 194Define Usage ip traceroute Trace Route from the CLI InterfaceStart Trace Route ip traceroute start 195Backup Configuration Backup and Restore FeaturesRestore Configuration Ping and traceroute from the web interface