Manuals / Patton electronic / Computer Equipment / Network Card

Patton electronic 3086 manual Routed application configurations to a Dslam, RFC 1483 Routed

Models: 3086

1 196

Download 196 pages 1.92 Kb

Page 81

Model 3086 G.SHDSL Integrated Access Device User Guide	4 • Basic Application Configurations

–No authentication

–Leave User name and Password blank. Click on Apply.

3.Go to G.SHDSL in the Configuration Menu, then the submenu Configuration. Leave Terminal Type as Central.

Change Interface Type to atm. Click on the Configure button.

In the Action submenu under G.SHDSL, change Action to Deactivate, then click on Action. Return to Action, select Start and click on Action.

Routed application configurations to a DSLAM

Five routed WAN services are offered, RFC 1483, PPPoH, IPoA, PPPoA, and PPPoE Routed.

RFC 1483 Routed

RFC 1483 provides the simplest method of connecting end stations over an ATM network. User data in the form of Ethernet packets is encapsulated into AAL-5 PDUs for transport over ATM. RFC 1483 provides no authentication and configuration that would be provided by PPP.

Model 3086 (Remote) Configuration Steps (RFC 1483 Routed)

From the command line interface (CLI) via the RS-232 control port,

ﬁip list interfaces

One IP interface was called ip1 with an IP address of 192.168.1.1 Change it to an IP address which is in the same subnet as the Desktop PC. For example, to 192.168.100.2. The default IP mask is 255.255.255.0.

ﬁ ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0

DSLAM Connections with remote CPE units

81

Image 81

Patton electronic 3086 manual Routed application configurations to a Dslam, RFC 1483 Routed

Contents

Shdsl Integrated Access Device Patton Electronics Company, Inc Contents Basic Application Configurations Contents Specialized Configurations 113 Contacting Patton for assistance 143 Cable Recommendations 157 Contents Page About this guide AudienceStructure Precautions Factory default parameters Safety when working with electricityAbout this guide Typographical conventions used in this document General conventionsMouse conventions General Information Chapter contents Model 3086 G.SHDSL IAD overview General attributesModel 3086 G.SHDSL IAD overview Ethernet Shdsl CharacteristicsTDM Interface Protocol support PPP Support ATM ProtocolsManagement Model Security WAN DSL Rear panel connectors and switches Power connectorConsole port outlined in red RJ-11/4 DSL line port uses pins 2 and 3 of the RJ-11 port Ethernet port outlined in greenLine port outlined in yellow Product Overview Applications Overview Product Overview IP/FR and TDM Access Internet/Extranet AccessIP/FR and Voice over DSL Product Overview Metro Intranet Access Quick Start Installation Hardware installation Installing the AC power cordWhat you will need Quick Start Installation Connecting network cables PC Configuration Web Operation and ConfigurationIP address Quick Start modification IP address has now been successfully changed Model 3086 menu structure is shown in on Model 3086 home page displays see Figure Model 3086 Menu Structure Basic Application Configurations Basic Application Configurations IPoA Routed RFC Introduction TDM Port Routed WAN Services Bridged WAN Services Rear panel power and interface connectors Connecting the 3086 serial port to a DCE Connecting the 3086 serial port to a DTEX.21 Ports Interfaces X.21 Ports Configuring the V.35 or X.21 port via DIP switches DIP switches location Switch Position Function Factory Default Selected Option Switch Bank S2 Switch Bank S3 T1 Interface Connection T1 Interface DIP Switch Configuration T1 Interface Configuration Data Rate kbps Figuration only Line Code The 3086 T1 interface uses B8ZS Web Interface Configuration E1 Interface Connection E1 Interface Description of S2 options follows the table E1/CRC S3-8 Setting Web Interface Configuration Using the 3086 as a simple modem TDM data over DSL CLI configurationCLI configuration Wait for configuration saved message… Saving configuration… Clear Error Counters Web browser configurationCircuit ID Intended DSL Data Rate Intended Serial Interface Data Rate DSL Rate Number of i BitTerminal Type TDM Plus Ethernet Traffic Selecting the DSL link speed Selecting PCM modeAssigning bandwidth to serial and Ethernet ports Central or Remote terminal Master/Slave For 3086 a at the prompt type For 3086 B typeSelect between Annex a and Annex B To select Annex B type Circuit ID Intended Serial Interface Data Rate Interface Type Model 3086 Remote Configuration Steps PPPoH Bridged Using the 3086 in Routed or Bridged applicationsTwo stand-alone units directly connected Ethernet extension Hdlc Pppoh Bridged Leave User name and Password blank. Click on Apply Model 3086 Central Configuration Steps PPPoH Bridged Network Extension HDLC-PPPoH Routed Model 3086 Remote Configuration Steps PPPoH Routed Model 3086 G.SHDSL Integrated Access Device User Guide Click on Configure Basic Application Configurations Model 3086 Central Configuration Steps PPPoH Routed Using the 3086 in Routed or Bridged applications Bridged application configurations to a Dslam RFC 1483 Bridged ConfigurationDslam Connections with remote CPE units Model 3086 Remote Configuration Steps RFC 1483 Bridged Model 3086 Central Configuration Steps RFC 1483 Bridged PPPoH Bridged Configuration Dslam Connections with remote CPE units Model 3086 Central Configuration Steps PPPoH Bridged Model 3086 Remote Configuration Steps PPPoA Bridged PPPoA Bridged RFC 2364 Configuration VPI = VCI = LLC header mode = off Hdlc header mode = off Model 3086 CentralConfiguration Steps PPPoA Bridged Routed application configurations to a Dslam Model 3086 Remote Configuration Steps RFC 1483 RoutedRFC 1483 Routed Model 3086 G.SHDSL Integrated Access Device User Guide Basic Application Configurations One IP interface was called ip1 with an IP address Model 3086 Central Configuration Steps RFC 1483 Routed Ip set interface ip1 ipaddress 192.168.100.2 Dslam Connections with remote CPE units Basic Application Configurations PPPoH Routed Ip set interface ip1 ipaddress 192.168.100.2 Dslam Connections with remote CPE units Basic Application Configurations Model 3086 Central Configuration Steps PPPoH Routed Basic Application Configurations Basic Application Configurations PPPoA Routed RFC Model 3086 Remote-Client Configuration Steps PPPoA Routed Chap User Namefred Passwoodfredspass Click on Configure Basic Application Configurations Dslam Connections with remote CPE units Model 3086 Central-Server Configuration Steps PPPoA Routed 100 101 102 Local IP Magic Number MRU 103 104 105 106 Model 3086 Remote Configuration Steps IPoA Routed IPoA Routed RFC107 108 109 110 Model 3086 Central Configuration Steps IPoA Routed VPI0 VCI700 WAN IP address Click on Apply111 112 Specialized Configurations Router IP ConfigurationsRIP and RIPv2 Static Route Dhcp Server and Relay 115 Specialized Configurations 116 DNS Client 117 DNS Relay Mode IP Configurations Security 120 Configuring the IAD Configuring the security interfaces Security121 122 Deleting a Firewall Policy Firewall Portfilters Enabling the FirewallFirewall Policies Firewall policy named item0 is now deleted 124 Security Triggers 125 Scan Attack Block DurationDefault = 86400 seconds Intrusion Detection System IDS126 127 Intrusion Detection System IDS NAT Network Address Translation 130 Enabling NAT Global address pool and reserved map NAT Network Address Translation131 132 Monitoring Status 134 Status LEDs Diagnostics Configuration Software UpgradesProcedure Ping Operating Local Analog Loopback LAL-Serial Port Loop DiagnosticsOperating Remote Digital Loopback RDL-DSL Loop 137 T1/E1 Diagnostics Network Loop138 139 T1/E1 Local Loop 140 QRSS-BIT Error Rate Diagnostics T1/E1 connection Status AlarmsTransceiver Status FDL statistics T1 only 142 BIT Error Rate V.52 Diagnostics Contacting Patton for assistance Out-of-warranty service Warranty coverageContact information Returns for credit RMA numbers Return for credit policyShipping instructions Contacting Patton for assistancePage Appendix a Compliance information Compliance SafetyRadio and TV Interference FCC Part CE Declaration of Conformity FCC Part 68 Acta Statement Authorized European RepresentativeIndustry Canada Notice 149 150 Appendix B Specifications Shdsl Characteristics General CharacteristicsEthernet 152 T1/E1 Interface 3086/RIK and RIT models only Sync Serial Interface64K/G.703 Port 3086/RIF Model Protocol Support ATM Protocols PPP SupportManagement 154 Power and Power Supply Specifications DimensionsSecurity Compliance Standard Requirements 156 Appendix C Cable Recommendations Ethernet Cable DSL CableAdapter Foot 3 m, RJ-11/RJ-11 refer to RJ-11non-shielded port on Appendix D Physical Connectors RJ-45 shielded 10/100 Ethernet port Assuming the MDI-X switch is in the out positionRJ-11 non-shielded port RJ-45 non-shielded RS-232 console port EIA-561 35 DB-25 Female Connector 35 M/34 ConnectorPhysical Connectors Serial port 21 DB-15 Connector E1/T1 RJ-48C Connector Power inputIEC 320 connector two prong 162 163 Appendix E Command Line Interface CLI Operation Produces a list of numbered transport objects CLI TerminologyLocal VT-100 emulation Remote Telnet Command Line Interface CLI Operation Using the ConsoleThen 165 Setting user passwords Administering user accountsAdding new users Following information is returned Controlling login access Changing user settingsControlling user access Shdsl Commands To establish the DSL link For CPE remote unit168 169 170 Appendix F Interworking Functions Information Interworking Functions Information ManagementType Default Value nomaintenance LMI Configuration OptionsFrame Relay Local Management Interface 173 T391Value Default Value MgtAutoStart Default Value FalseT392Value Default Value FullReportCycle Default Value Show current configuration CLI Configuration MethodsCommand lmi show Set configuration variable Web Configuration Methods Frame Relay Service Interworking FRF.8FRS Configuration Options DE Mapping Translation Mode Fecn Mapping177 178 FRS Name Command frs set group # variable value CLI Configuration MethodShow one of the eight groups Set variable attributes on a specified group Set variable attributes on a specified channel FRS Overview Screen180 181 Group/Channel Level Configuration Screen FRN Configuration Options Frame Relay Network Interworking FRF.5182 183 Port Level Configuration Options 184 Channel Level Configuration Options List all ports available to the system CLI Configuration Methods for Port Level ManagementShow detailed information about a specific port 185 Configuration Management of the Channel Level Variables Command frn set port# variable valueUnderstanding the Channel Level View 186 Set Configuration Variables associated with the Channels Command frn set port# channel # variable value187 188 Port Level Information Screen Channel Level Information Screen Packet Information Screen189 Frame Relay Configuration Options Frame Relay CLI Configuration OptionsFrame Relay Ethernet Based Operations Delete the specified transport Clear all Frame Relay TransportsList all active Frame Relay Channels 191 Web Based Configuration of the Frame Relay Channel Serial Interface ConfigurationConfiguration Variables Available Clock Mode Show current configuration settings Gain help about the Serial Interface193 Ping commands from the CLI Interface Web Interface ConfigurationsPing and Trace Route 194 Define Usage ip traceroute Trace Route from the CLI InterfaceStart Trace Route ip traceroute start 195 Backup Configuration Backup and Restore FeaturesRestore Configuration Ping and traceroute from the web interface