4 • Basic Application Configurations

Model 3086 G.SHDSL Integrated Access Device User Guide

 

 

VPI = 0

VCI = 300

LLC header mode = off

HDLC header mode = off

No authentication

Leave User name and Password blank. Click on Apply.

3.Go to G.SHDSL in the Configuration Menu, then the submenu Configuration.

Change Terminal Type to Remote and Interface Type to atm. Click on the Configure button. In the Action submenu under G.SHDSL, change Action to Deactivate, then click on Action.

Return to Action, select Start and click on Action.

Model 3086 (Central)Configuration Steps (PPPoA Bridged)

From the command line interface (CLI) via the RS-232 control port,

ip list interfaces

One IP interface is called ip1 with an IP address of 192.168.1.1

Change the IP address so it is in the same subnet as both PCs. For example, to 192.168.100.3

ip set interface ip1 ipaddress 192.168.100.3 255.255.255.0

1.Now you can bring up the web-page management system on your browser by entering the IP address of the 3086.

2.On the Menu, go to Configuration, then to WAN Connections. Delete the factory default WAN services already defined.

Click on Create a new service in the main window, select PPPoA_Bridged and click on the Configure button. In the Description field, enter the description you wish. In this example, it is called PPPoA Bridged.

VPI = 0

VCI = 300

LLC header mode = off

HDLC header mode = off

80

DSLAM Connections with remote CPE units

Page 80
Image 80
Patton electronic manual Model 3086 CentralConfiguration Steps PPPoA Bridged