
CD CHANGER MODE | CLOCK - TIME |
Stopping SCAN
To stop scanning,
➮briefly press the 2 (SCAN) button 9 again.
The currently scanned track will then continue to be played normally.
Note:
●You can set the scanning time (scantime). For further details, read the section entitled “Setting the scantime” in the “CD mode” chapter.
Pausing playback (PAUSE)
➮Press button 1 () 9.
Canceling pause
➮Press button 2 () 9 while in pause mode.
Playback is resumed.
CLOCK - Time
Displaying the time
To display the time,
➮briefly press the button ;.
Setting the clock
➮Press the MENU button 5.
➮Keep pressing the or
button 5 until “CLOCKSET” appears in the display.
➮Press the button 5.
The time appears in the display. The minutes flash on and off and can be adjusted.
➮Adjust the minutes using the /
buttons 5.
Once the minutes are set,
➮press the button 5. The hours flash on and off.
➮Adjust the hours using the /
buttons 5.
When you have finished making your changes,
➮press the MENU button 5 twice.
Selecting 12/24-hour clock mode
➮Press the MENU button 5.
➮Keep pressing the or
button 5 until “24 H MODE” or “12 H MODE” appears in the display.
➮Press the or
button 5to switch between the modes.
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS
15