Patton electronic 3086 manual Figuration only

Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations

Switch Bank S3

The table below shows the default configuration for switch S3. A description of S3 options follows this table.

Table 7. S3 Summary Table

Switch Position	Function	Factory Default	Selected Option
S3-1	CO/CP Selection	On	CO
S3-2	Reserved	On	Reserved
S3-3	Clock	On	Network
S3-4	Reserved	On	Reserved
S3-5	Reserved	On	Reserved
S3-6	Annex	Off = Annex A	Annex B
		On = Annex B
S3-7	Reserved	On	Reserved
S3-8	Reserved	On	Reserved

Switch S3-1: CO/CP selection. CO and CP stand for Central Office and Customer Premise respectively. When deploying the model 3086s, units installed at the Customer location should be set to CP and units installed at a Central Office should be set to CO. For point-to-point operation, one unit must be CO while the other must be CP.

S3-3	Setting
Off	CP
ON	CO

Switch S3-3: Transmit Clock Mode. Use Switches S3-3 to configure the 3086 for internal or external (net- work) clock mode.

S3-3	Clock mode
Off	Internal. DSL and T1 transmit clock generated by the 3086
On	External. DSL and T1 transmit clock derived from the received T1 signal (CO con-
	figuration only)

T1 Interface 47