4 • Basic Application Configurations | Model 3086 G.SHDSL Integrated Access Device User Guide |
|
|
Click on G.SHDSL in the Configuration Menu > Configuration > verify that Terminal Type is remote and Interface Type is “hdlc.” If changed, then click on Configure.
Click on Action > Select deactivate for Action > Click on the Action button.
2.On the Menu, go to Configuration, then to WAN Connections.
Delete both default WAN services already defined.
Click on Create a new service in the main window, select PPPoH_Routed and click on the Configure button. In the Description field, enter the description you wish. In this example, it is called PPPoH Routed. Description:PPPoH Routed
–Interface:1
–WAN IP address: 192.168.164.3
–LLC Header Mode:off
–HDLC Header Mode:ON
–No authentication
–Username:[blank]
–Password:[blank]
Click on Configure.
3.Go to Configuration Menu > Configuration > WAN connections > Edit (for PPPoH Routed service) > Edit ‘IP Interface’ > Ipaddr: [enter
the WAN IP Address, in this example = 192.168.164.3] > Click on Change.
4.Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route > Create the gateway to the remote
3086 by entering the WAN IP address of the remote 3086, in this example, enter 192.168.164.2 in the Gateway field > OK
The other fields should be:
– Destination:0.0.0.0
– Gateway:192.168.164.2 [already changed in the first part of step 5).]
– Mask:0.0.0.0
72 | Using the 3086 in Routed or Bridged applications |
