Pull on

Test button

Check the water level

2

Whenever all ice is used at one time, the above step 3 and 4 must be repeated (before

dispense the fi rst 4 to 6 ice cubes, it needs waiting 8 hours).

This will replenish the ice cubes and ensure maximum ice production.

When you dump the ice from the ice bucket, you should press the dispenser lever once with ‘ICE CUBED’ or ‘CRUSHED’ function ON to get new ice faster after replacing the ice bucket in the refrigerator.

Using the water dispenser

Place a glass underneath the water outlet and push gently against the water dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the water from splashing out. If you have just installed the refrigerator or installed a new water fi lter,Flush 3L through fi lter before use

(fl ush approximately 6 minutes). Make sure that water fl ows clearly again before drinking.

When you do not use the water dispenser for 2~3 days (especially during the summer), the dispensed water may have a funny smell or taste. If

this occurs, we recommend that you discard the fi rst 1~2 glasses for better tasting water.

Using the ice off function

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are not using the ice dispens

Push

er, the ice cubes may

clump together. Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

If you have a long vacation or business trip, close

14_ Operating

the water valve and shut off the water supply to the Refrigerator. This will help prevent

accidental leakages. Do not disassemble the Ice- maker personally. It may cause disorder. Do not wash or spray the ice bucket with water. Just wipe it with a dry cloth. In order to operate the ice-maker properly, water pressure of 138~862 Kpa is required.

Water clouding phenomenon

All water provided to refrigerators fl ows through the core fi lter which is an alkaline water fi lter. In this process, the pressure in the water that has fl owed out of the fi lter gets increased, and oxygen and nitrogen become saturated. When this water fl ows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes.

When you select “Crushed”, the ice-maker grinds the ice cubes into crushed ice.

PARTS AND FEATURES

Use this page to become more familiar with the parts and features of the Refrigerator.

DA99-03402B.indb 섹션2:14

2012.4.26 3:6:31 PM