3. Vegetable & Fruit Drawers
To remove - Pull the drawer out to full extension. Tilt up the front of the drawer and pull straight out.
To relocate - Insert the drawer into the frame rails and push back into place.
The drawers need to be removed before the glass shelf above them can be lifted out.
Do not open the drawers while the pantry is open. It may cause a scratch or breakage tothe drawer covers.
USING THE TILTING POCKET
The Tilting Pocket can be used to store up to a 406mm pizza if you place it as shown in the illustration.
4. Cool Select Pantry™
To remove the pantry - Pull the pantry out to full extension. Tilt up the front side of pantry and pull straight out.
To relocate the pantry - Push the rails to the back of the Refrigerator. Place the drawer onto the rails and slide the pantry back until it is in place.
To remove the divider - Pull the pantry completely out to full extension and raise the front side of the divider to unhook it from the rear wall of the pantry, then lift the divider out.
To relocate the divider - Hook the back of the divider over the rear wall of the pantry and push the divider down.
USING THE DOORS
The Refrigerator doors ensure that the doors close all the way and are securely sealed. When the Refrigerator door is only partially open, it will automatically close. The door will stay open when opened more than 76mm.
16_ Operating
REMOVING THE FREEZER ACCESSORIES
1. Tilting Pocket
To remove - Pull the brackets upward until you hear a clicking sound and remove the pocket
To replace - Hook the ends of the pocket into both brackets 1 and push down until it locks into place.
1 |
2. Auto Pull out Drawer
To remove - Pull the drawer out to full extension. Tilt up rear of drawer and lift straight out.
To relocate - Place the drawer onto the rails by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer in.
2 |
1 |
3. Freezer Drawer
To remove the freezer drawer - Pull the freezer drawer out fully. Tilt up the rear of the bin and lift it out to remove.
To relocate the freezer drawer - Place the bin into the rail assembly.
2012.4.26 3:6:32 PM |
