Samsung RFG29DEPN1/SML manual Adjusting the Doors, Making Minor Adjustments Between Doors

ASSEMBLE THE FREEZER DRAWER

To reattach the freezer drawer, assemble parts in reverse order.

ADJUSTING THE DOORS

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make fi nal adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

Insert a fl at-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

flat-blade Control screwdriver(-) Lever

2.Insert the supplied hex wrench 3 into the shaft 4 of the lower hinge.

3.Please adjust the height by turning the hex wrench

3clockwise () or counter-clockwise

().

2

3

4

1

When you turn the hex wrench counter-

clockwise(), the door will move up.

1. After adjusting the doors, please insert the supplied fastener-ring 5 using a pair of pliers 6 in the gap between the hinge-grommet 7 and the lower hinge 8 . The number of fastener-rings you’ll need to insert depends on the gap.

201 SETTINGOPERATINGUP

Both control levers must be touching the

CAUTION fl oor to avoid possible personal injury or property damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.

Two fastener-rings are enclosed with the refrigerator.

The thickness of each fastener-ring is 1mm.

ADJUSTING THE FREEZER DRAWER LEVEL

Adjustment part Freezer Drawer

When the left	When the
door is lower	left door is
than the right	higher than
door.	the right
	door.

Adjustment part

Adjustment part

1.If you open the drawer 1 , you can see the lower hinge 2 .

Setting up _9

DA99-03402B.indb Sec4:9 2012.4.26 3:6:21 PM