10 VMA5096/VMA7196
E
ng
li
s
h
Changing the video region mode (NTSC/PAL)
1. PressMENU several times to locate the VIDEOSYS option.
2. Press or to alternate between NTSC and PAL.
Disabling automatic power on
Your monitor is preset at the factory to switch on when you turn on your vehicle’s
ignition. You can set it up to remain off until you press the power button on the monitor.
1. PressMENU several times until you reach the AUTOPOWER option.
2. Press or to turn automatic power ON and OFF.
Returning adjustments to the factory settings
1. PressMENU several times to locate the RESET option.
2. Press either or to reset the settings.
If you don’t wish to reset the settings, either press MENUagain or wait for the
monitor to exit the picture adjustment menus automatically.
Note
If you reset the options and the monitor was set to source 2 (A/V2), the
monitor reverts to the default setting of A/V1. If there is no active video
source on A/V1, the screen may go dark. Press INPUT to switch the
monitor back to A/V2.
Connecting a video source
The video sources you are using may be preinstalled for you, or your configuration
may be designed to allow you to change devices.
For example, returning from a day at the beach, you may disconnect your game from
the game port and connect your camcorder to view the video you just shot.
CAUTION!
Always take care when disconnecting and connecting electronic
devices.
Care and maintenance
Cleaning the cabinet
Use a soft, dry cloth to gently wipe dust and dirt from the cabinet.
Do not use benzene, thinner, car cleaner, or other cleaners. These substances may
damage the cabinet or cause the paint to peel.
VMA5096_VMA7196_OwnersManual_rev.pmd.p65 11/23/05, 2:53 PM10