Clarion VMA5096, VMA7196 Switching between video sources, Playing two videos or games at once

2.Press MENU again until you reach the option you wish to adjust. The monitor displays the adjustment bar.

	Example of an adjustment bar
TINT	adjusts the overall color of the monitor.
COLOR	adjust the way each color displays.
BRIGHT	adjusts the monitor’s brightness.
CONTRAST	adjusts the differences between light and dark areas.

3. Press the right end of the picture controls button to increase the adjustment.

Press the left end of the picture controls button to decrease the adjustment.

Each setting has 30 steps of adjustment range and is preset at the factory to 15. Once you’ve adjusted the picture, wait a moment and the adjustment menus disappear.

Switching between video sources

If your vehicle has two video sources, for example, a DVD player and a game console, you can easily switch between them.

1.Press INPUT.

The monitor displays A/V1.

2.Press INPUT again to select A/V2.

Note

If you’re using only one video source, the screen remains dark when you select the unavailable source.

Playing two videos or games at once

If your vehicle is equipped with two LCD monitors in the headrests and two video source units, two different videos or games can play at the same time.

Each monitor transmits the infrared audio signal over its own channel, A or B. When a vehicle has two monitors, the default is to configure the monitor in the driver’s headrest to use IR channel A, and the monitor in the passanger’s headrest to use IR channel B. You can change this.

1.Press MENU several times to locate the IR CH option.

2.Press or to alternate between A and B.

Note

You don’t need to select the IR channel if your vehicle has only one monitor or only one video source.

VMA5096/VMA7196 9

English

VMA5096_VMA7196_OwnersManual_rev.pmd.p65 9

11/23/05, 2:53 PM