Patton electronic 3086 manual Web browser configuration, Circuit ID, Clear Error Counters

4 • Basic Application Configurations Model 3086 G.SHDSL Integrated Access Device User Guide

Web browser configuration

From the main menu in the 3086, select GSHDSL > Configuration. Enter the selections as shown in the screen below. For Terminal Type, select Central for 3086 A, and Remote for 3086 B. Then go to the bottom of the screen and click on the Configure button.

Circuit ID

User can enter up to 30 alphanumeric characters for circuit identification

Clear Error Counters

Selecting “Clear” will reset the error counters displayed in the “Status” screen.

Intended DSL Data Rate

This is the DSL line rate at which you wish to connect. In a point-to-point deployment, the unit designated as “Central” will impose the line rate on the unit designated as “Remote”. The model 3086 offers nx64 kbps speeds from 192 kbps to 4.6 Mbps.

Actual DSL Rate

This field displays the DSL rate connection; it displays the payload rate plus 8kbps automatically assigned to a DSL management channel. For instance, if a DSL rate of 1984 kbps is selected in the “Intended DSL Data Rate” window, the actual DSL data rate field will display 1992 kbps, this corresponds to 1984 kbps payload plus 8 kbps management channel.

56 Using the 3086 as a simple modem (TDM data over DSL)