Patton electronic 3086 manual Data Rate kbps

4 • Basic Application ConfigurationsModel 3086 G.SHDSL Integrated Access Device User Guide

Switches S2-1 through S2-7.Use Switches S2-1 through S2-7 to set the data rate (see Table 5 on page 43. Each position represents nx64 settings.

S7	S6	S5	S4	S3	S2	S1	Data Rate (kbps)
On	On	On	On	On	On	Off	64
On	On	On	On	On	Off	On	128
On	On	On	On	On	Off	Off	192
On	On	On	On	Off	On	On	256
On	On	On	On	Off	On	Off	320
On	On	On	On	Off	Off	On	384
On	On	On	On	Off	Off	Off	448
On	On	On	Off	On	On	On	512
On	On	On	Off	On	On	Off	576
On	On	On	Off	On	Off	On	640
On	On	On	Off	On	Off	Off	704
On	On	On	Off	Off	On	On	768
On	On	On	Off	Off	On	Off	832
On	On	On	Off	Off	Off	On	896
On	On	On	Off	Off	Off	Off	960
On	On	Off	On	On	On	On	1024
On	On	Off	On	On	On	Off	1088
On	On	Off	On	On	Off	On	1152
On	On	Off	On	On	Off	Off	1216
On	On	Off	On	Off	On	On	1280
On	On	Off	On	Off	On	Off	1344
On	On	Off	On	Off	Off	On	1408
On	On	Off	On	Off	Off	Off	1472
On	On	Off	Off	On	On	On	1536

Switch S2-8.S2-8 activates configuration of Model 3086 via DIP switches. Any time the user desires to mod- ify the 3086 configuration available through DIP switches, make the changes to the corresponding switches and then set S2-8, from On to Off position, wait 3-4 seconds and set back to the On position. Changes made to configuration via DIP switches will not take effect if S2-8 isn’t toggled.

S2-8	Condition
ON->Off->ON	Implements switch configuration (toggled ON/OFF)

46 T1 Interface