Connecting Headphones, Selecting the Sound Mode

Connecting Headphones

You can connect a set of headphones to your set if you wish to	TV Rear Panel
watch a TV programme without disturbing the other people in the	TV Rear Panel
room.
When you insert the head set jack into the corresponding port, you
can not operate "Internal Mute" in Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.

You will not receive sound from the speakers when you connect headphones to the system. The headphone volume and TV volume are adjusted differently.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the

screen.

	Audio Type	Dual 1/2	Default
A2	Mono	Mono	Automatic	You can also set these options
A2	Stereo	Stereo ↔ Mono	change	simply by pressing the DUAL
Stereo	Stereo	Stereo ↔ Mono		simply by pressing the DUAL
Stereo	Dual	Dual 1 ↔ Dual 2	Dual 1	button on remote control.
	Dual	Dual 1 ↔ Dual 2	Dual 1	button on remote control.
	Mono	Mono	Automatic
NICAM	Stereo	Mono ↔ Stereo	change
Stereo	Dual	Mono ↔ Dual 1	Dual 1
		Dual 2

If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

Adjusting the Volume Automatically

Each broadcasting station has its own signal conditions and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the