Eicon Networks DIVA LAN ISDN manual Dtmf interface, Commands

Chapter Ten: Other Configuration Tools DTMF interface 145

DTMF interface

The DIVA LAN ISDN Modem enables you to set certain parameters using a standard touch-tone telephone.

Prerequisites

• touch-tone analog phone

Local access

•Phone must be plugged into PHONE port 2.

•ISDN line must not be connected.

Remote access

• Not available.

How it works

Plug an analog phone into PHONE port 2.

•Each command starts and ends with a #.

•A short beep indicates that the command you entered was accepted.

•Continuous beeping indicates that the command you entered was rejected. Enter # to start a new command and end the beeping.

Commands

The following commands are available.

Set primary ISDN telephone number

#TN1 ISDN number #		(#861ISDN number #)
Example: #8614078#
Set second ISDN telephone number
#TN2 ISDN number #		(#862 ISDN number #)
Example: #8624079#
Set ISDN switch type
• #STA#	(#782#) AT&T 5ESS
• #STP#	(#787#) AT&T 5ESS Point-to-Point
• #STN#	(#786#) NI-1
• #STD#	(#783#) Detect Switch Type Automatically

Save configuration and reset

#SA# (#72#)

Reset to factory defaults

#RF# (#73#)

Set LAN IP address

#IPxxx*xxx*xxx*xxx# (#47xxx*xxx*xxx*xxx#) Example: #47192*168*4*1#.

Set LAN IP subnet mask

#SMxxx*xxx*xxx*xxx# (#76xxx*xxx*xxx*xxx#) Example: #76255*255*255*0#.