Appendix C: Command Line Reference | IP filters 178 |
|
|
SET IP DESTINATION Ipaddr netMask
Valid context: Filter/Profile
Sets the destination address and network mask for the filter. Only data which is destined for the specified address and network is processed by this filter.
Ipaddr: Destination IP address of data to filter.
netMask: Destination network mask for data to filter.
SET UDP SOURCE lowPort highPort
Valid context: Filter
Sets the minimum and maximum source UDP ports for which this filter will process data. lowPort: Minimum UDP port number of data to filter. Range: 0 to highPort. Default 0. highPort: Maximum UDP port number of data to filter. Range lowPort to 65535. Default 65535.
SET UDP DESTINATION lowPort highPort
Valid context: Filter
Sets the minimum and maximum destination UDP ports for which this filter will process data. lowPort: Minimum UDP port number of data to filter. Range: 0 to highPort. Default 0. highPort: Maximum UDP port number of data to filter. Range lowPort to 65535. Default 65535.
SET TCP SOURCE lowPort highPort
Valid context: Filter
Sets the minimum and maximum source TCP ports for which this filter will process data. lowPort: Minimum TCP port number of data to filter. Range: 0 to highPort. Default 0. highPort: Maximum TCP port number of data to filter. Range lowPort to 65535. Default 65535.
SET TCP DESTINATION lowPort highPort
Valid context: Filter
Sets the minimum and maximum destination TCP ports for which this filter will process data. lowPort: Minimum TCP port number of data to filter. Range: 0 to highPort. Default 0. highPort: Maximum TCP port number of data to filter. Range lowPort to 65535. Default 65535.
SET IP FILTER filterNum
Valid context: Profile
Makes the specified filter the active context so you can edit it. filterNum: Number of the IP filter to edit.
SHOW IP FILTER
Valid context: Filter/Profile
Display all IP filters for the current profile. Or if in a Filter, only those filters that are defined for the current filter.
