Chapter Ten: Other Configuration Tools | Command line interface (CLI) 149 |
|
|
To load the new firmware
1.Log in to the CLI.
2.Type the following command and press Enter.
>monitor
3.Type the following command and press Enter.
>at@load
4.The DIVA LAN ISDN Modem warns you that your firmware is about to be erased. Note that all configuration settings are retained, including passwords. Type ‘Y’.
This will erase your FLASH memory, do you wish to proceed (y/n)? y
5.When you see the following message, the DIVA LAN ISDN Modem is ready to receive the firmware update.
Please start XMODEM transmission of file to be loaded
6.Start your file transfer using 1K XMODEM (or XMODEM). The terminal program displays a dialog box showing the progress of the transfer.
7.When the transfer is done, the DIVA LAN ISDN Modem automatically resets itself to invoke the new software.
