Eicon Networks DIVA LAN ISDN manual Logging and Mail Trace, Disable LOG Output Screen Remote

Appendix C: Command Line Reference Logging and Mail Trace 189

Logging and Mail Trace

SET LOG FILTER {TRACE DEBUG INFO SECURITY WARNING}

Valid context: General

Specifies the type of information that will be written to the DIVA LAN ISDN Modem event log. See SHOW LOG for a description of the information written to the log by each setting.

ENABLE LOG MODULE taskName ALL

DISABLE LOG MODULE taskName ALL

Valid context: General

Enables or disables the inclusion of firmware module messages in the log file. Each firmware module issues status messages during the course of its operations. Use this command to set which messages are displayed from the log when you issue the SHOW LOG command.

taskName: Use module names as shown in SHOW LOG. For example: DHCP, DNS, PPP, IP, IPPP.

ALL: Affects all module messages.

ENABLE LOG OUTPUT SCREEN REMOTE hostAddr

DISABLE LOG OUTPUT SCREEN REMOTE

Valid context: General

Sends event log information to the specified device.

SCREEN: Every time an event is added to the log it is also displayed on the local screen.

REMOTE: Every time an event occurs, a message is sent to the remote device.

hostAddr: IP address of the remote device.

SHOW MAIL TRACE [control]

Valid context: General

Displays a mail trace.

control: [buf_size[,entry_size[,filter]]] -p -s -r

buf_size: Size of trace buffer in bytes. (hexadecimal)

entry_size: Maximum size of each element to include.

filter: Type of filter.

-p: Stop/pause trace.

-s: Restart trace from paused state.

-r: Reset (clear) trace buffer.

nothing: auto-pause the mail trace and read current contents

STOP MAIL TRACE

Valid context: General

Stops an active mail trace.

SHOW LOG [STATUS]

Valid context: General

Displays the event log. If STATUS is specified, this command only displays status information.