Eicon Networks DIVA LAN ISDN manual SET PPP Authent Encrypted ANY

Appendix C: Command Line Reference PPP 194

PPP

SET PPP AUTHENT {ENCRYPTED ANY}

Valid context: Profile/PPP

Specifies how authentication is handled for a call. If the remote is not using the same type of password (encrypted/unencrypted), then the call is rejected.

ENCRYPTED: Accepts only calls using encrypted passwords for authentication.

ANY: Accepts calls using either encrypted or unencrypted passwords. Default setting.

ENABLE PPP AUTHENT

DISABLE PPP AUTHENT

Valid context: Profile/PPP

Enables or disables authentication when dialing out. If enabled, the DIVA LAN ISDN Modem attempts to authenticate the remote with whatever authentication method is defined. This option is disabled by default.

SET PPP LPASSWORD localPassword

Valid context: Profile/PPP

Sets the password that the DIVA LAN ISDN Modem will use when replying to valid authentication requests. For example, when connecting to your ISP, this is the password that is used to log on. Specify 0 to 31 alphanumeric characters (no spaces).

SET PPP LNAME localName

Valid context: Profile/PPP

Sets the name that the DIVA LAN ISDN Modem will use when replying to valid authentication requests. For example, when connecting to your ISP, this is the name that is used to log on. Specify 0 to 31 alphanumeric characters (no spaces).

SET PPP RNAME remoteName

Valid context: Profile/PPP

Sets the name the remote user or device must supply when authentication is requested by the DIVA LAN ISDN Modem. Specify 1 to 31 alphanumeric characters (no spaces).

SET PPP RPASSWORD remotePassword

Valid context: Profile/PPP

Sets the password the remote device must supply when authentication is requested by the DIVA LAN ISDN Modem. Specify 1 to 31 alphanumeric characters (no spaces).

ENABLE PPP COMPRESSION

DISABLE PPP COMPRESSION

Valid context: Profile/PPP

Enables or disables PPP compression. When enabled, the DIVA LAN ISDN Modem automatically negotiates one of the following standards: Ascend, MPPC, MS-STAC, STAC 1, and STAC 3. Compression is disabled by default.

ENABLE PPP SECUREID

DISABLE PPP SECUREID

Valid context: Profile/PPP

Enables or disables support for SecureID client applications.