Eicon Networks DIVA LAN ISDN manual SET Isdn Calltype Auto 56K DOV, Disable Isdn DELAY56K

Appendix C: Command Line Reference ISDN 186

SET ISDN TEI {isdnTEI DYNAMIC}

Valid context: General

Defines the TEI used by ISDN to support X.25 communications over the D-channel. This setting takes precedence over TEI sharing (dynamic allocation).

isdnTEI: TEI number to assign to the D-channel for X.25. Your service provider will provide this value. Range: 1 to 127.

DYNAMIC: TEI number is negotiated with the ISDN switch and also allows TEIs to be shared (ENABLE ISDN TEISHARING).

SET ISDN CALLTYPE {AUTO 56K DOV}

Valid context: Profile/PPP

Defines the ISDN call type for this profile.

56K: Transmit and receive at 56 kbps.

DOV: Establish all data calls as voice calls. Useful in areas where voice calls cost less than data calls. Throughput is not affected.

AUTO: Transmit and receive at 64 kbps or 56 kbps.

ENABLE ISDN DELAY56K {DEFAULT VALUE delay}

Valid context: General

An attempt is made to automatically re-establish a data call at 56 kbps if a data call attempt failed at 64 kbps due to network congestion, or if a service or option was not available or not configured.

DEFAULT: Immediately try to connect at 56 kbps if a call fails at 64 kbps. In Australia and Japan, do not retry.

VALUE delay: Specifies how long to wait before retrying. Range 0 to 10 seconds., 254 (use pre-configured values depending on region), 255 (no retry).

DISABLE ISDN DELAY56K

Valid context: General

SHOW ISDN STATISTICS

Valid context: General

Displays statistics for the two ISDN channels.

SHOW ISDN STATUS

Valid context: General

Displays ISDN status information.

SHOW ISDN CONFIGURATION

Valid context: General

Displays ISDN configuration information.