Toshiba GD-1060 manual To select 2. Delayed COMM, press, To select 3. TX REPORT, press

A To select “2. DELAYED COMM,” press .

• Select to program a transmission start time.

(Refer to the description of the key.)

B To select “3. TX REPORT,” press .

•Set whether or not to print a TX report.

(Refer to the description of the key.)

C To select “4. LINE MONITOR,” press .

• Select to program the line monitor speaker during dialing.

D To select “5. QUALITY TX,” press .

• Select to program a lower speed communication.

(Refer to the description of the key.)

E To select “6. SUB ADDRESS,” press .

• Selected only when the remote FAX requires one.

(Refer to the description of the key.)

• To cancel programing press the key.

8 After you have done all required settings, select “1.COMPLETE.” The first ABB. NUMBER ENTRY screen is displayed.

9 Press the desired One Touch Key if you want to assign the registered Abbreviated Dial to a One

Touch ( to ) Key. Press the key if you do not want to assign the registered Abbreviated Dial to a One Touch Key.

DELAYED COMM.
TIME	: HH :MM
	10 :10 AM

TX REPORT

1.OFF

2.ON

LINE MONITOR 1.OFF

2.ON

QUALITY TX

1.OFF 2.14400 BPS 3. 9600 BPS

SUB ADDRESS

1.COMPLETE

2.SUB ADDRESS(SUB) 3.SELECTIVE POLLING(SEP)

ABB. NUMBER	001
PRESS ONE TOUCH KEY
TO ENTER OR
[SET]:TO SKIP
ABB. NUMBER	001
ONE TOUCH :	02

LONDON OFFICE

4

4-9