Toshiba GD-1060 manual Secure RX Security Code Setting, Key

Secure RX Security Code Setting

There are occasions when you may wish to secure access to incoming documents. Secure RX allows you to receive documents to memory until a security code is entered. This ensures that only users with the correct security code may retrieve documents. In addition, the Secure RX can be setup to automatically be activated during a specified time period.

To setup Secure RX, a 4-digit security code must be programmed first. After programming the security code, you can specify the time period during which the Secure RX will be active. 24-hour coverage for specific days of the week is selectable. This section describes the procedure for programming a security code or changing an existing security code.

1 Displaying the SECURE RX Menu.

Press: then

2 To select the Security Code for the first time or to

change an existing Security Code, press .

New Security Code Setting:
3 Enter a 4-digit password and press the	key.

Change an Existing Password:

If the security code already exists, and you wish to change the current password, enter the current

password and press the key.

Then enter your new 4-digit password and press the key.

SECURE RX 1.SECURITY CODE

2.ACTIVATE

SECURITY CODE ENTER CURRENT CODE:

SECURITY CODE

ENTER NEW SECURITY CODE:

4

4-39