Toshiba GD-1060 manual Chain Dialing, Enter the Dial number, Dialing, and Keypad Dialing by using

9. CHAIN DIALING

This function allows you to dial telephone/facsimile numbers that may require many digits with pauses for voice prompts or variations in number sequences such as long distance access codes, or specialized access lines. You can combine sets of numbers (Abbreviated Dialing, Alphabet Dialing, One Touch

Dialing, and Keypad Dialing) by using the Key.

1

2

Press the key.

Place the original. 3

•For details on how to place originals on the original glass.

( See page 2-8.)

3	Set the scanning conditions. (			See pages 2-10 to
	2-15.)
4 Press the			Key (on the Function key panel).
	Tip
	The chain dialing function can be used during a direct trans-
	mission when you press the			key before pressing
		key.
	the

5 Enter the Dial number.

Start constructing your dialing sequence using any of the following dialing methods.

You may use them consecutively until your enter dialing string has been entered.

After each entry sequence, the LCD screen displays the screen shown is step 4.

•Abbreviated Dialing ( See page 2-18.)

•Alphabet Dialing ( See page 2-19.)

•One Touch Dialing ( See page 2-21.)

•Keypad Dialing ( See page 2-16.)

Remember to add pauses (if required) to allow for voice

prompts or other system delays. ( See page 2-17.)

CHAIN DIAL COMM.

ENTER TEL NUMBER OR,

PRESS SPEED DIAL KEY

OR ONE TOUCH KEY

TELEPHONE NUMBERS LIST 1.ABB. NUMBER 2.SEARCH NAME

CHAIN DIAL COMM.

ABB.NUMBERS = (1-999)

CHAIN DIAL COMM.
ONE TOUCH KEY =	01

LONDON OFFICE

CHAIN DIAL COMM. :12345

6 When all the required entries are performed, press

the key.

•The facsimile starts scanning the document into memory, and automatically send document to the designated FAXes.

SCANNING TO MEMORY
JOB NUMBER	:	XXX
SCANNING PAGE	:	YYY
RESIDUAL MEMORY	:	ZZZ%

3-31