Toshiba GD-1060 Sending Originals Direct TX, On-hook Transmission, Press Key in the Control Panel

2

9. SENDING ORIGINALS (DIRECT TX) (Cont.)

On-hook Transmission

•Originals are sent in the direct TX mode regardless of the memory TX/direct TX setting in the transmission mode setting.

In this mode, you can confirm the answering tone from the remote FAX.

1 Press the key.

2 Place the original.

•For details on how to place originals on the original glass. ( See page 2-8.)

•Only one original sheet can be sent when scanning original on the glass.

3	Set the scanning conditions. ( See pages 2-10 to
	2-15.)
4 Press the		key in the Control Panel.

•You can hear the monitor tone from the built-in speaker.

• To cancel setting midway, press the key again.

5 Dial the remote FAX number. ( See pages 2-16 to 2-21.)

•You can specify only one destination.

Note

DIAL TEL NUMBER:

FEB25-2001 11:30AM M :100%

RESOLUTION:STANDARD :AUTO

:110

FEB25-2001 11:30AM M :100%

RESOLUTION:STANDARD :AUTO

In case of Keypad Dialing, each press of a digital key dials a number. So, if you make a mistake when dialing the remote

FAX number, press the		key to cut the line, press the
	key again and redial.

6 When you hear the answering tone output from the built-in speaker after the connection is made with

the remote FAX, press the key.

7	Press the	key. (Select “1.TRANSMIT”).
	• For scanning on the glass, setting the original size is

required here. (e-STUDIO16 only. See page 2-14.)

COMMUNICATING SETTING

1.TRANSMIT

2.RECEIVE

COMMUNICATING

JOB NUMBER :XXX

110

2-26BASIC OPERATION