Toshiba GD-1060 manual Conditions for a Relay/Relay-Relay Transmission Network, Facsimile unit

7. RELAY TRANSMISSION (Cont.)

To perform Relay Transmissions or Relay-Relay Transmissions, you must build a network beforehand. Consult your authorized TOSHIBA dealer for assistance in using this function.

Conditions for a Relay/Relay-Relay Transmission Network
1.	The sending station must be a this machine or another ITU-T relay communication compatible
	facsimile unit.
2.	The Hub Station must be a this machine facsimile or another ITU-T relay communication compatible
	facsimile unit with the Hub Station functions.
3.	The relay station must program the end station telephone numbers to Abbreviated Dial numbers
3	or One Touch keys or Group numbers. Up to 50 abbreviated dial numbers or one touch keys or
	groups can be programmed. For information on setting Relay Box. (	See page 3-19.)

4.Due to advanced planning and setup requirements for the Relay-Relay transmissions involving two or more Hub Stations transfers, contact your authorized TOSHIBA dealer for detailed instructions.

How to Setup a Relay Transmission:

•Hub Station

Create a Relay Box within a hub unit (like this machine) by following the procedures beginning on page 3-19.

Note

A Relay Box must be established for every possible unit if you wish to obtain a result report after the relay is completed.

•Originator

Transmit a document to the hub unit from an ITU-T relay compatible remote facsimile (like this machine) with the procedures beginning on page 3-22.

How to Setup a Relay-Relay Transmission:

•Hub Station

1.Register the facsimile telephone number of the Second Hub Station to a One Touch key or Abbreviated Number, see pages 2-18 and 2-21 At this time, the Relay Box Number located in the Second Hub Station should be registered as the SUB Address of the One Touch key or Abbreviated Number.

2.Create a Relay Box in the Hub Station, see “Setting Up a Relay Box.” Register the One Touch key or Abbreviated Number programmed in Step 1 to the Relay Box as the Second Hub Station.

•Second Hub Station

1.Register the facsimile telephone number of the End Station to a One Touch key or Abbreviated

Number. ( See pages 2-18 and 2-21.)

2.Create a Relay Box in the Second Hub Station, see “Setting Up a Relay Box.” Register the One Touch key or Abbreviated Number programmed in Step 1 to the Relay Box as the End Station.

•Originator

Transmit a document to the hub unit from an ITU-T relay compatible remote facsimile (like this machine) with the procedures beginning on page 3-22.

3-18HANDY FEATURES