Eicon Networks DIVA LAN ISDN manual Call Transfer, Feature Key values

Chapter Seven: Setting up the Phone Ports Supplementary services 99

Call Transfer

Call Transfer allows you to disconnect from a Three-Way Conference call and leave the other two people connected. It works as follows: Establish a Three-Way call as described in the section above. Hang up. The other two people remain connected.

Feature Key values

To access calling features, the DIVA LAN ISDN Modem supplies the ISDN switch with certain codes called Feature Keys. Not all ISDN providers use the same Feature Keys (unless you are using an EZ-ISDN or IOC line). Ask your ISDN service provider for a list of Feature Key values that your DIVA LAN ISDN Modem should use.

Note Some ISDN providers allow you to specify which Feature Key values you want to use. If this is the case, you can supply the DIVA LAN ISDN Modem default values, and no further configuration is necessary. If your ISDN provider supports user supplied Feature Key values, supply them with the values in the following table.

The default values for the DIVA LAN ISDN Modem are as follows:

Feature Key	Value
3-Way Conference	60
Call Drop	62
Message Waiting Indicator	63

If the Feature Key values supplied by your ISDN provider do not match, you must configure your DIVA LAN ISDN Modem to use the proper values. The Feature Key values can only be changed via the CLI. See Chapter Ten for details on how to use the CLI.