Appendix C: Command Line Reference

General 174

 

 

General

MONITOR

Valid context: General

Invokes monitor mode. Use monitor mode to upload new firmware or to dump system memory for debugging purposes. You can set the DIVA LAN ISDN Modem to automatically invoke monitor mode when a fatal error occurs by issuing the SET ONERROR command.

NEXT

Valid context: Filter

Makes the next IP filter the current context so you can edit it.

PREVIOUS

Valid context: Filter

Makes the previous IP filter the current context so you can edit it.

PING Ipaddr [number] [size]

Valid context: General

Lets you determine if an IP address is reachable.

Ipaddr: IP address of device to PING.

number: Number of messages to send. Range: 1 to no limit. Default: 4

size: size of the message in bytes. Range: 1 to 1472. Default: 64

RESET [FACTORY HUB]

Valid context: General

Resets the DIVA LAN ISDN Modem.

FACTORY: Resets the DIVA LAN ISDN Modem and returns all parameters to their factory default settings. Deletes all user-defined profiles and the password.

HUB: Resets only the Ethernet ports.

LOGOUT

Valid context: General

Closes the current configuration session.

SET ONERROR {HALT RESET}

Valid context: General

Defines how the DIVA LAN ISDN Modem reacts when it encounters a fatal error and cannot continue to operate normally.

HALT: Activate monitor mode when a fatal error is encountered. The fault LED

will be lit.

RESET: Reset the system when fatal error is encountered.

SAVE [profileName]

Valid context: General

Saves the current configuration settings to non-volatile memory on the DIVA LAN ISDN Modem. If you do not save your changes, they will be lost when you power-off or reset the DIVA LAN ISDN Modem.

Page 174
Image 174
Eicon Networks DIVA LAN ISDN manual General