HARDWARE INSTALLATION:
AT-HD44M-S as master:
1.Connect all sources to HDMI Inputs on the 4x4 HDMI over CAT5 matrix master
2.Connect each DDC output on the
3.Connect each TMDS output on the
4.Connect IR emitter cable to the
5.Connect the +5V 6A DC power supply to the
6.Power on all HDMI sources
7.Power on the
AT-HD44M-R as receiver:
1.Connect each HDMI output to HDMI displays
2.Connect the TMDS input on the
3.Connect the DDC input on the
4.Connect IR receiver cable and place the IR receiver at the appropriate position that can re- ceive the IR signals sent from the users
5.Use push button to adjust the EQ until the picture and sound are clear
9