AT-HD44M-R
Front Panel
IN: Push button for switching input source channel in sequential order
1.EQ: Adjust the 8-level equalization control for HDMI signals. 0 – 7 = strongest – weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience.
2.Source LED: Indicate input source
3.HDMI Out: Connect to HDTV with a HDMI cable
4.IR: Plug in IR receiver cable
Rear Panel
6.+5V DC: 5V power jack (optional*)
7.TMDS: RJ-45 input for TMDS channel
8.DDC: RJ-45 input for DDC channel
*AT-HD44M-R has been tested extensively and found that it doesn’t require external power supply. If in rare situation you find it cannot work with the AT-HD44M-S, please use any +5V power adapter to plug in the power jack and see if it can work. If not, please contact your technical support for further service.