Appendix C: Command Line Reference | ISDN 184 |
|
|
ISDN
ENABLE ISDN TEISHARING
DISABLE ISDN TEISHARING
Valid context: General
Enables or disables the sharing of TEI assignments. Some switches only make two TEIs available for an ISDN line. Therefore, if you are using AO/DI, enable this option. This shares the TEI between channels B1 and D.
TEISHARING is disabled by default and is only available if TEI assignment is
dynamic (SET ISDN TEI DYNAMIC).
ENABLE ISDN ANSWER
DISABLE ISDN ANSWER
Valid context: General
Specifies if the DIVA LAN ISDN Modem will answer incoming ISDN data
calls. If disabled, incoming data calls are ignored. This parameter is
disabled by default.
SET ISDN BILLINTERVAL initialTime recurringTime
Valid context: General
Allows you to minimize your ISDN charges by controlling the frequency with which the DIVA LAN ISDN Modem will enable and disable an ISDN channel.
initialTime: The minimum amount of time that an ISDN channel will be
enabled for. Range: 0 to 1800 seconds. Default: 60 seconds.
recurringTime: The minimum amount of time that an ISDN channel remains enabled after initialTime is
surpassed. Range: 10 to 1800 seconds. Default: 60 seconds.
SET ISDN DN channel isdnNumber [DATA]
Valid context: General
Sets your ISDN telephone number. ISDN telephone numbers are defined by your ISDN provider to identify your ISDN equipment. Enter 20 digits followed by a dot followed by a 20 digit subaddress (optional). Note that the following three characters will be removed after the number is entered: hyphen, space, parenthesis.
channel: First or second ISDN number. Range: 1 to 2.
isdnNumber: ISDN phone number.
DATA: International version only. Enables enhanced support for data traffic on the selected port. Throughput is increased, but supplementary calling services are not supported.
SET ISDN TELEPHONE channel isdnNumber
Valid context: General
This command is an alias for SET ISDN DN.
SET ISDN TELEPHONE channel isdnNumber [DATA]
Valid context: General
This command is an alias for SET ISDN DN.
