Installing TCP/IP for Windows NT | Eicon Networks DIVA LAN ISDN

Appendix A: TCP/IP Configuration	Installing TCP/IP for Windows NT 154

Installing TCP/IP for Windows NT

Installing TCP/IP

1.On the Start menu, choose Settings, then choose Control Panel.

2.Double-click the Network icon. The Network dialog box appears.

3.Click the Protocols tab.

4.Click Add.

5.Select TCP/IP protocol as your network protocol.

6.Click OK.

7.Click Yes to use DHCP.

8.When prompted, insert the original Windows NT installation CD and enter d:\i386 (where d: is the drive letter of your CD drive), and click Continue.

9.Click Close.

10.Click Yes when prompted to restart your system.

Configuring TCP/IP

1.On the Start menu, choose Settings, then choose Control Panel.

2.Double-click the Network icon. The Network dialog box appears.

3.Click the Protocols tab.

4.Select TCP/IP protocol.

5.Click Properties.

6.Select Obtain an IP address from a DHCP server.

7.Click the DNS tab.

8.Check if any DNS addresses are configured. If so, delete them.

9.Click OK.

Image 154

Eicon Networks DIVA LAN ISDN manual Installing TCP/IP for Windows NT, Configuring TCP/IP

Contents

Diva LAN Isdn Modem User’s Guide First Edition August 206-312-01 Table of Contents Chapter Four Chapter ThreeChapter Five Chapter Seven Chapter SixChapter Eight Chapter Nine Chapter Ten Appendix B Appendix aAppendix C Appendix D Introduction Creating your own LAN for resource sharing Connecting to the InternetIntroducing the Diva LAN Isdn Modem Diva LAN Isdn Modem Creating a VPN Connecting to a corporate networkAttaching telephones and fax machines Total network security Connecting more computersCompression for faster throughput Bandwidth on-demand Advanced diagnosticsUnsupported configurations Advanced Isdn tariff management Summary of features Administration Contacting customer servicesWorld wide web Getting Started Installation overview Verify your package contents Prepare for installationVerify the configuration of your computers To configure the Diva LAN Isdn Modem To use the advanced configuration optionsTo run the Modem Monitor software Important Isdn concepts Isdn access interfacesChoose a connection protocol Isdn channel usage Multilink PPP Choosing a connection protocolPPP Multilink PPP + Bacp Multilink PPP + AO/DI Summary120 Information to record when ordering your line Order an Isdn Line Gather X.25 information Gather Internet account informationGather V.120 information Scripting Install the Diva LAN Isdn Modem To install the Diva LAN Isdn Modem Chapter Two Getting Started Install the Diva LAN Isdn Modem Install Modem Monitor Windows 95/98/NT4 To install Modem MonitorPage Page Connecting a non-Windows computer to the Diva LAN Isdn Modem Page Configuring the Internet connection To configure the Internet connectionPage Fill in the fields as indicated below Page Page Registering your Diva LAN Isdn Modem Using your Diva LAN Isdn ModemHow long will the line stay connected? What’s next? Using Modem Monitor Starting Modem Monitor Start menu program group Start menu options Properties dialog box Buttons Utilities dialog box Options dialog box Profile table Status ViewerUtilities Web-based Configuration Interface Starting the web-based configuration interface To start the web-based configuration interface Saving configuration settings Getting help Connection profile settings General settings and connection profilesGeneral settings Connection profile types Editing the ISP profile To edit the ISP profilePage Editing LAN settings To edit the LAN profile Saving and restoring configuration files To save/restore configuration settings System status Viewing status informationFront panel display Obtaining statistics To upgrade the firmware Upgrading the Diva LAN Isdn Modem firmware Resetting to factory defaults To reset the Diva LAN Isdn Modem to factory defaults Minimizing Isdn Charges To set the idle timer Idle timerTo define Cost Control settings Cost Control Data call thresholds Isdn billing intervals Configuring Bacp To configure Bacp Chapter Five Minimizing Isdn Charges Configuring Bacp Configuring AO/DI To configure AO/DI To configure X.25 settings On the D-channel Chapter Five Minimizing Isdn Charges Configuring AO/DI Setting Isdn active intervals To set Isdn active intervals Spoofing NetBIOS services To enable spoofing of NetBIOS services Data compression To enable manual dialing Manual dialing Restricting analog calls To restrict analog calls To enable data over voice Data over voice Traffic filtering Security Security features Configuration interfaces To set the system password System passwordTo erase the system password Automatic log out NAT static mappings Network address translationSecurity benefits How it works Configuring a NAT mapping for an FTP server Default NAT serverConfiguring a NAT static mapping for a web server Running a web or FTP server To create a static NAT mapping Remote management Internet To enable remote management Incoming data calls Incoming calls and IP addressing To enable support for incoming data calls Enable Answer incoming data calls Click Authentication To set up call screening Call screening Call authentication To set up call authentication Callback modes CallbackCallback options Timeout waiting for callback Delay before host calls backTo set up callback Enable Manual dialing only Custom security features Setting up the Phone Ports Setting phone numbers manually Connecting multiple analog devices Connecting modems and fax machinesTo enable support for fax/modem How it works To enable call bumpingCall bumping Requirements Restricting analog calls To enable supplementary services Supplementary servicesCall Forwarding VoiceMail Service Failure ToneCall Waiting Caller ID Feature Key values Call Transfer Connecting to a Corporate Network Overview Resources Gather information Configure the Corporate profile To configure the Corporate profilePage Page Page Timeouts Using the corporate connectionNetBIOS name resolution Support for Microsoft Network Neighborhood What’s next? Advanced Installations To define retry settings Connection retries To define a backup profile and set the profile restore delay Using Modem Monitor Installing on an existing LANManual installation Uncheck the Dhcp server enabled option If your LAN has a Dhcp server Adjusting configuration settings on the LANIf your LAN uses static addressing If your LAN has a router Connecting more than four computers Third-party Ethernet Hub Creating a virtual private network To create a VPN Connecting to the VPN Page Selecting a connections protocol Installation and configuration procedureConcurrent Internet and Intranet connections Defining routes About IP addresses Using masksIP routes Static vs. dynamic addresses 192.168.1.1 External addresses ISP Single connection Why routes are neededInternet 212.182.22.39 Internet Multiple connections Routing on the local LAN 212.182.22.39 Routing Information Protocol RIP Defining routes for the Diva LAN Isdn Modem Chapter Nine Advanced Installations IP routes IP filters How filtering works What is a datagram? Default filtersTo define a filter Chapter Nine Advanced Installations IP filters Source/Destination ActionDirection Location IP filtering examples Dropping incoming traffic from a specific network 1st filter Allowing incoming traffic only from a specific network2nd filter Blocking web surfing Chapter Nine Advanced Installations To configure the V.120 protocol Making a V.120 connectionPage To uninstall the Eicon SecurID Client software To install the Eicon SecurID Client softwareSecurID support To enable SecurID support Other Configuration Tools Local configuration Configuration optionsRemote configuration Web interface Local accessRemote access Prerequisites Tftp interface Using Web interfaceUsing the command line interface CLI Enabling Tftp server support Uploading/downloading configuration files Loading new firmware via Tftp Commands Dtmf interface Establishing a Telnet connection via IP Command line interface CLIEstablishing a serial connection Using the command line interface To establish a serial connection Command line reference About configuration contextDefault profiles Connection profiles To load the new firmware TCP/IP Configuration Installing TCP/IP Installing and configuring TCP/IP for Windows 95/98Configuring TCP/IP Select Use Dhcp for Wins Resolution Page Installing TCP/IP Installing TCP/IP for Windows NTConfiguring TCP/IP Configuring TCP/IP on an iMac Technical Information B1, B2 Diva LAN Isdn Modem indicator lightsLink Power FaultE1, E2, E3, E4 Diva LAN Isdn Modem connectors Port Description Resetting to factory defaults Resetting the Diva LAN Isdn ModemResetting operational settings To reset Determining termination requirements Installing the resistorTermination Single Isdn device Command Line Reference Notational Conventions Section uses the following conventions Commands For information on See Disable Aodi Areacode Enable Aodi AreacodeSET Aodi Txbuffer bytes SET Callback Delay seconds SET Callback Mode type option number1 number2SET Callback Timeout seconds Show Callback Configuration ADD Isdn Screening channel number Enable Isdn ScreeningDisable Isdn Screening Delete Isdn Screening channel index Call thresholds Enable Isdn Threshold Disable Isdn ThresholdSET Isdn Threshold intervalDays maxHours maxCalls SET Dhcp Type Server None Show Dhcp Status Show Dhcp Configuration Stop Dhcp Trace Delete Dhcp Staticmap ip Enable Dhcp Staticmap ip Disable Dhcp Staticmap ipShow Dhcp Staticmap SET DNS Domain domain Enable DNS Relay Disable DNS RelayShow DNS Configuration SET DNS Address Primary Secondary dnsaddr Show Ethernet Address EthernetShow Ethernet Statistics Show Ethernet Trace memsize framesize General Show Date Enable Display Disable DisplayValidate Show Time Show Version Show LED StatusShow System Status Show Calls Status Active Last SET Action Drop Forward Enable Filter Disable FilterSET Direction in OUT ANY Show IP Filter SET Type ALL UDP TCP SYN Anyicmp Show IP NAT Enable IP NAT Disable IP NATSET IP NAT UDP TCP Default port address ADD IP NAT UDP TCP port ipaddress Delete IP Route Ipaddr IP routingADD IP Route Ipaddr maskLenmetric gwAddr SET IP Route Ipaddr maskLen gwAddr Show IP Address IP variousShow Icmp Statistics Show IP Statistics Enable IP Spoofing Disable IP Spoofing Show IP ConfigurationSET IP Services ALL Intelligent Minimal None Enable IP Multicast Disable IP Multicast Enable Isdn Teisharing Disable Isdn Teisharing Enable Isdn Answer Disable Isdn Answer SET Isdn Switch Jate Euro BT TPH China Singapore SET Isdn Switch NI1 5ESS Auto 5ESSPPDetect Isdn Spid SET Isdn Calltype Auto 56K DOV Disable Isdn DELAY56KShow Isdn Configuration Show Isdn Statistics Show Isdn Accesstime Isdn Access TimeEnable Isdn Accesstime Disable Isdn Accesstime Show Lapd Trace memsize framesize Stop Lapd Trace SET LOG Filter Trace Debug Info Security Warning Disable LOG Output Screen RemoteLogging and Mail Trace Stop Mail Trace SET Mlppp Mode Disable Normal Bacp Aodi SET Mlppp Linkup threshold delay channelSET Mlppp Linkdown threshold delay channel Show Mlppp Configuration Enable Phone Callerid Disable Phone Callerid Enable Phone Altring channel Disable Phone Altring channelEnable Phone Callbumping Disable Phone Callbumping Phone Disable Phone Voicemail channel SET Phone Msgindicator refreshEnable Phone Voicemail channel Silent SET Phone Capability channel Speech Data SET Phone Country country Show Phone ConfigurationShow Phone Country Enable PPP Secureid Disable PPP Secureid Enable PPP Authent Disable PPP AuthentEnable PPP Compression Disable PPP Compression SET PPP Authent Encrypted ANY Enable PPP Echorequest Disable PPP Echorequest Show PPP Configuration Show PPP Trace portmask memsize framesize Show PPP StatisticsShow PPP Status Stop PPP Trace port Profiles Show Q931 Trace memsize framesize 931Stop Q931 Trace Show RIP Configuration Enable RIP V1 V2 V2COMPATIBLE MergeDisable RIP Merge Show RIP Statistics Delete RIP Reject ipaddr Show RIP Reject SET Snmp Contact name SET Snmp Name nameSET Snmp Description name SET Snmp Location name Show TCP Trace memsize framesize Show TCP StatisticsStop TCP Trace Enable Tftp Server Disable Tftp Server Tftp Time Protocol Enable Timeprotocol Disable TimeprotocolShow Timeprotocol Configuration SET Timeprotocol Server timeServer Show UDP Trace memsize framesize Show UDP StatisticsStop UDP Trace SET V120 Mode Multiframe Unacknowledged Enable Disable120 Show V120 Trace memsize framesize SET V120 Idletime IdleDelayShow V120 Configuration Stop V120 Trace Delete Script Line index ADD Script Line index command argumentScripting Show Script index SET X25 Facilities hexstring SET X25 Address localX25addrSET X25 CUD callUserData SET X25 LCN lcnNumber Show X25 Status Show X25 ConfigurationStop X25 Trace Regulatory Information 212 Regulatory Information for the U.S.AFCC Part 68 Notice Regulatory Information for Canada 213