4.10 Memory module

4 Replacement Procedures

Installing a memory module

To install a memory module(s), confirm that the computer is in boot mode. Then perform the following procedure. (See Figure 4-16.)

1.Turn up the insulator and insert the memory module into the connector of the computer slantwise with the label up.

2.Push down the memory module until it is latched firmly

Caution: The power must be turned off when you insert the memory module. Inserting a memory module with the power on risks damaging the module or the computer itself.

Do not install a memory module in slot B only. Use slot A prior to slot B. Otherwise, the computer or the memory may be damaged.

Never press hard or bend the memory module.

PORTEGE A200 Maintenance Manual (960 -499)

4-25

Page 229
Image 229
Toshiba A200 manual Memory module Replacement Procedures, Installing a memory module