Toshiba A200 manual Transmit Receive

3 Tests and Diagnostics		3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program
Subtest01	(i82562 + ICHx)
	This subtest checks the operation of mini-PCI I/F by the loopback test in the chip.
	The following message will appear.
	[LAN transmit & receive test !]
			COMPLETED Repeat count	=	00000
			Error count	=	00000
	LOOPBACK TEST
	100Mbps Auto-negotiation TxRx Test
	Destination Address		= xxxxxxxxxxxx
	Source Address		= xxxxxxxxxxxx

** 100Base-TX Full-Duplex **

<TRANSMIT >

<RECEIVE >

Note: The menu displayed by your computer may be slightly different from the one shown above.

If a defective is found, NG message will appear in the display.

3-66 PORTEGE A200 Maintenance Manual (960-499)