Toshiba A200 manual Replacing TMD fluorescent lamp10

4 Replacement Procedures 4.26 Fluorescent lamp

4.Bezel set <Procedure>

1)Hook the upper side (TAB side) of bezel to the three latches of frame. ?

2)Latch the side.

3)Mate the lamp side. ?

Caution: 1. Do not damage the TAB.

2.Make sure the three latches of bezel are hooked.

3.The PCB GND-CU shall be within the bezel.

PCB GND-CU shall be within bezel.

Folding of reflector shall be within bezel.

?

?

?

?

PCB GND-CU shall be within the bezel.

Figure 4-59 Replacing TMD fluorescent lamp(10)

4-70 PORTEGE A200 Maintenance Manual (960 -499)