Toshiba A200 manual Replacing TMD fluorescent lamp4

4 Replacement Procedures 4.26 Fluorescent lamp

3.Removing bezel <Procedure>

1)Turn over the module with the insulating sheet.

2)Releases latches of the bezel and frame (3 points).

3)Lift up slowly the bottom side (Back light side) of bezel and release latches (3 points)at the upper to remove the bezel. Note that the bezels at the upper and lower are fixed with double-sides tape.

Caution: 1. When releasing the upper latches, do not damage the TAB. 2. When removing the bezel, do not deform the bezel.

Latches

Figure 4-53 Replacing TMD fluorescent lamp(4)

4-64 PORTEGE A200 Maintenance Manual (960 -499)