Toshiba A200 manual Replacement Procedures Speaker, Installing a speaker

4 Replacement Procedures 4.14 Speaker

2.Disconnect the speaker cable from the connector PJ6003 on the system board.

3.Peel off the four insulators and one glass tape and remove the speakers and speaker cable.

Installing a speaker

To remove a speaker, perform the following procedure. (See Figure 4-20.)

1. Set the speakers in place and fix them with the following screws .

? M2? 3S S-THIN HEAD screw ? 4

2.Connect the speaker cable to the connector PJ6003 on the system board and stick the glass tape .

3.Place the speaker cable into the cable slot and stick the four insulators .

4-30 PORTEGE A200 Maintenance Manual (960 -499)