Toshiba A200 manual RTC battery Replacement Procedures, Removing the RTC battery

4.16 RTC battery 4 Replacement Procedures

4.16 RTC battery

Removing the RTC battery

To remove the RTC battery, perform the following procedure. (See Figure 4-25.)

1.Peel off the glass tape and disconnect the RTC battery cable from the connector PJ8760 on the system board.

2.Remove the RTC battery and cushion.

Cushion

RTC battery

Glass tape

RTC battery cable

PJ8760

GND pattern

Figure 4-25 Removing the RTC battery

Installing a RTC battery

To install a RTC battery, perform the following procedure. (See Figure 4-25.)

1.Connect the RTC battery cable to the connector PJ8760 on the system board.

2.Set the RTC battery and cushion into the slot and put the RTC battery cable into the space between the fan and system board.

3.Stick the glass tape .

Caution: Be careful not to stick the glass tape on the GND pattern.

PORTEGE A200 Maintenance Manual (960 -499) 4-35