4.25 Hinge assembly | 4 Replacement Procedures |
3. Take both the hinge assemblies out from the holes of the base.
M2.5? 4B FLAT HEAD
Hinge assembly
Hinge assembly
M2.5? 4B FLAT HEAD
Figure 4-49 Removing the hinge assembly (base side)
Installing a hinge assembly
To install a hinge assembly, perform the following procedure. (See Figure
1. | Fix the hinge assemblies to the LCD cover with the following screws. | |||
| ? | M2.5? 6 | Tapping screw | ? 2 (left? 1, right? 1) |
| ? | M2.5? 4B | FLAT HEAD | ? 2 (left? 1, right? 1) |
2. | Fix the hinge assemblies to the base with the following screws. | |||
| ? | M2.5? 4B | FLAT HEAD | ? 4 |
Caution: When fixing the hinge assembly, use new screws and apply Locktight to them.
PORTEGE A200 Maintenance Manual (960 |