Toshiba A200 manual Installing a LED cable

4.23 LCD cable/LED cable 4 Replacement Procedures

Installing a LED cable

To install a LED cable, perform the following procedure. (See Figure 4-45.)

1.Pass the LED cable through the hinge hole to the system board side.

2.Install the hinge cap and fix it with the following screw. Do not pinch the LED cable between the hinge cap and the cover assembly. Be careful not to miss the direction of the hinge cap.

? M2.5? 6B S-THIN HEAD screw ? 1

3.Align the white mark on the LED cable to the hinge cap and stick the insulator (back of the cover assembly) on the LED cable.

PORTEGE A200 Maintenance Manual (960 -499) 4-55