Toshiba A200 manual Installing a palm rest

4 Replacement Procedures 4.8 Palm rest/Touch pad

Installing a palm rest

The following describes the procedure for installing a palm rest. (See Figure 4-11 and 4-12.)

1.Set the palm rest from the left side while guiding the two holes of the palm rest to the audio jacks.

Caution: When setting the palm rest, fit the position of wireless LAN switch on the system board and the position of slider on the palm rest.

2. Fix the palm rest with the following screws .

?	M2? 3C	S-THIN HEAD screw	? 2
?	M2.5? 12B	FLAT HEAD screw	? 1

3.Connect the flat cable to the connector PJ 3240 on the system board.

4.Turn over the computer and fix the palm rest with the following screw.

? M2? 3C S-THIN HEAD screw ? 1

4-20 PORTEGE A200 Maintenance Manual (960 -499)